Pioneer X-CM56: Using Headphones Using the sleep timer

Getting started 04

Calling the wake-up timer

English

It can be used to re-use an existing timer setting.

Using Headphones

Connect to the jack plug of the headphones.

1 As well as steps 1 through 3 in “Setting the

When the headphones are connected, there is no sound

wake-up timer”.

output from the speakers.

2 Press



/



to select “TIMER ON”, then

press ENTER.

Français Español

Cancelling the wake-up timer

It can be used to turn off the timer setting.

1 As well as steps 1 through 3 in “Setting the

wake-up timer”.

2 Press



/



to select “TIMER OFF”, then

press ENTER.

Using the wake-up timer

1 Press

Í

to turn the power off.

• Do not turn the volume on to full at switch on and listen

2 At the wake-up time, this unit will turn on

to music at moderate levels. Excessive sound pressure

from earphones and headphones can cause hearing

automatically and play the selected input

loss.

function.

• Before plugging in or unplugging the headphone,

reduce the volume.

Note

• Be sure your headphone has a 3.5 mm diameter plug

• If at the wake-up time the USB storage device is not

and impedance between 16

Ω

and 50

Ω

. The

connected to this unit or a disc is not inserted, this unit

recommended impedance is 32

Ω

.

will be turned to on and not play back the track.

• Some discs may not be played automatically at the

wake-up time.

• If you set the timer, take one minute or more between

the start and end time.

Using the sleep timer

The sleep timer switches off the unit after a specified time so

you can fall asleep without worrying about it.

1 Press SLEEP repeatedly to select a switch

off time.

Choose between 10 min, 20 min, 30 min, 60 min, 90 min, 120

min, 150 min, 180 min or OFF. The newly set value displays

for 3 seconds, and then the setting is completed.

Note

• The sleep timer can be set by pressing SLEEP while

the remaining time is displayed.

15

En

SN29402593_X-CM56&56D_En.book 15 ページ ２０１６年５月２７日　金曜日　午後３時４７分