Pioneer X-CM56: Chapter 6: USB playback Playing USB storage devices

USB playback 06

Chapter 6:

English

USB playback

Note

Français Español

Playing USB storage devices

• This unit may not recognize a USB storage device, play files

It is possible to listen to two-channel audio using the USB

or supply power to a USB storage device. For details, see

interface with MP3 files on the front of this receiver.

When a USB storage device is connected

on page 31.

• When a USB storage device is not playing and the unit has

• Pioneer does not guarantee that any file recorded on a

not been operated for 20 minutes or more, the power will

USB storage device will play or that power will be supplied

automatically turn off. In this case it is required that the

to a USB storage device. Also note that Pioneer will accept

Auto power off is switched to

ON

(page 34).

no responsibility whatsoever for loss of files on USB

storage devices caused by connection to this unit.

• For details about MP3, see page 33.

Repeat play

Repeat play can play one track, all tracks or a programmed

1 Press USB as the input source.

sequence continuously.

“USB” is shown on the main display.

To repeat one track:

2 Connect the USB storage device.

Press repeatedly until “REPEAT ONE” appears. Press

• This receiver does not support a USB hub.

ENTER.

To repeat all tracks:

Press repeatedly until “REPEAT ALL” appears. Press

ENTER.

To cancel repeat play:

Press repeatedly until “REPEAT OFF” appears. Press

ENTER.

Note

• After performing repeat play, be sure to press

∫

. Otherwise,

the file of USB storage device will play continuously.

• During repeat play, random play is not possible.

3 When the recognition is completed, press



/



to select the folder where the music file is

Random play

stored ([ ]), then press



or ENTER.

The file of USB storage device can be played in random

• MP3 track data is called “music file” and the location

order automatically.

they are stored is called a “folder” in this document.

• Repeat this step if there are other folders inside the

To random play all tracks:

selected folder.

Press RANDOM repeatedly until “RANDOM ON” appears.

• To return to the previous folder, press



or .

Press ENTER.

To cancel random play:

4 Press



/



to select the music file ([ ]), and

Press RANDOM repeatedly until “RANDOM OFF” appears.

then press

1;

or ENTER.

Press ENTER.

• Once play starts, only music files inside the same folder

can be played continuously.

Note

• For details about the basic operations, see page 17.

• When changing to a different input source, stop the

• If you press the 9 during random play, you can move

USB memory playback first, before changing.

to the track selected next by the random operation.

• Turn the power off before removing the USB storage device.

• In random play, the unit will select and play tracks

automatically. (You cannot select the order of the tracks.)

• During random play, repeat play is not possible.

Switch the display contents

This unit can switch the information recorded in the USB

storage device. For details, see Switch the display contents

on page 18.

19

En

SN29402593_X-CM56&56D_En.book 19 ページ ２０１６年５月２７日　金曜日　午後３時４７分