Pioneer X-CM56: Chapter 5: Disc playback Playing discs or files

Disc playback05

Chapter 5:

Disc playback

This system can play back a standard CD, CD-R/RW in the

Play MP3 music files

CD format and CD-R/RW with MP3 files, but cannot record

MP3 track data is called “music file” and the location they are

on them. Some audio CD-R and CD-RW discs may not be

stored is called a “folder” in this document.

playable due to the state of the disc or the device that was

used for recording.

• For details about MP3, see page 33.

Playing discs or files

Load the disc

1 When the recognition is completed, press



/



to select the folder where the music file is

1 Press

Í

to turn the power on.

stored ([ ]), then press



or ENTER.

2 Press CD on the remote control or INPUT

• Repeat this step if there are other folders inside the

repeatedly on the main unit to select CD input.

selected folder.

• To return to the previous folder, press



or .

3 Press

<

on the main unit to open the disc tray.

2 Press



/



to select the music file ([ ]), and

4 Place the disc on the disc tray, label side up.

then press

1;

or ENTER.

• Once play starts, only music files inside the same folder

can be played continuously.

CAUTION

• Do not place two discs in one disc tray.

• Do not play discs of special shapes (heart, octagon,

etc). It may cause malfunctions.

• Do not push the disc tray whilst it is moving.

• If the power fails whilst the tray is open, wait until the

power is restored.

5 Press

<

on the main unit to close the disc

• Be sure to place 8 cm disc in the middle of the disc tray.

tray.

Note

Play tracks on a CD

• Due to the structure of the disc information, it takes

longer to read an MP3 disc than a normal CD

1 When the recognition is completed, press

(approximately 20 to 90 seconds).

1;

.

• When the beginning of the first track is reached during

After the last track is played, the unit will stop automatically.

fast reverse, the unit will enter the playback mode (only

for CD).

• If TV or radio interference occurs during CD operation,

move the unit away from the TV or radio.

Tip

• When no operation has done in CD mode and the audio

file is not played for more than 20 minutes, the power

will automatically turn off. In this case it is required that

the Auto power off is switched to ON.

• Auto power off can be switched to ON/OFF (page 34).

16

En

SN29402593_X-CM56&56D_En.book 16 ページ ２０１６年５月２７日　金曜日　午後３時４７分