Pioneer VSX-519V-K: Using the MULTI-ZONE feature 07 Using the MULTI-ZONE controls MULTI-ZONE remote controls

Using the MULTI-ZONE feature 07

Using the MULTI-ZONE controls

•If you select TUNER, you can use the tuner

English

controls to select a preset station (see

The following steps use the front panel controls

Saving station presets on page 38 if you’re

to select sources. See MULTI-ZONE remote

2

controls below.

unsure how to do this).

4 When you’re finished, press

CONTROL

again to return to the main zone controls.

Français

You can also press the MULTI-ZONE ON/OFF

button on the front panel to switch off all

3

output to the sub zone.

MULTI-ZONE remote controls

Press the RECEIVER button on the remote

control, then with the SHIFT button pressed,

press the buttons below to operate the

1 Press the

MULTI-ZONE ON/OFF

button

corresponding zone.

on the front panel.

Each press selects a MULTI-ZONE option:

The following table shows the possible MULTI-

Italiano

ZONE remote controls:

• ZONE 2 ON – Switches the MULTI-ZONE

feature on

• ZONE 2 OFF – Switches the MULTI-ZONE

feature off

The ZONE indicator lights when the MULTI-

Nederlands

ZONE control has been switched ON.

2 Press

CONTROL

.

1

• When the receiver is on,

make sure that

any operations for the sub zone are done

while ZONE 2 shows in the display. If this is

a. Without pressing the SHIFT button, you can

Español

not showing, the front panel controls affect

switch power on/off in the sub zone.

the main zone only.

b. In ZONE 2, you cannot select MULTI IN inputs.

3Use the

INPUT SELECTOR

dial to select

the source for the zone you have selected.

For example, Z2: CDR sends the source

Deutsch

connected to the CDR inputs to the sub room

(ZONE 2).

37

En

1If the receiver is in standby, the display is dimmed, and ZONE2 ON continues to show in the display.

VSX_519V_MY.book 37 ページ ２００９年１月１６日　金曜日　午後７時３２分

Button What it does

ZONE 2

Switches on/off power in the sub zone.

a

ON/OFF

INPUT

Use to select the input source in the

SELECT

sub zone.

MULTI

Use to select the input source directly

b

CONTROL

in the sub zone.

buttons

2 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the

station in the other zone. Please be careful not to change stations when recording a radio broadcast.

3 • You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.

• If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so that this

receiver is in standby.

• Volume level cannot be adjusted with this receiver. Use the separate amplifier connected to the ZONE2 OUT to adjust the

volume.