Pioneer VSX-519V-K: Playing other sources Selecting the multichannel analog inputs Choosing the input signal Using the headphone

Listening to your system05

When set to DIGITAL or HDMI, 2 lights when

a Dolby Digital signal is input, and DTS lights

Playing other sources

when a DTS signal is input.

1 Turn on the power of the playback

When the HDMI is selected, the A and

component.

DIGITAL indicators are off (see page 21).

2 Turn on the power of the receiver.

3 Select the source you want to playback.

Selecting the multichannel

Use the MULTI CONTROL buttons (INPUT

analog inputs

SELECTOR).

If you have connected a decoder or a BD/DVD

4 Start playback of the component you

player with multichannel analog outputs to this

selected in step 1.

receiver (page 10), you must select the analog

3

multichannel inputs for surround sound.

• Press MULTI IN on the remote control.

Choosing the input signal

To cancel playback from the multichannel

On this receiver, it is possible to switch the

inputs, switches to the other input signal.

input signals for the different inputs as

1

described below.

1 Press SIGNAL SEL to select the input signal

Using the headphone

corresponding to the source component.

When DIGITAL (C1/O1/O2) or HDMI (H) is

1 Insert the headphone into the PHONE

selected and the selected audio input is not

jack.

provided, A (analog) is automatically selected.

2 Press

RECEIVER

then press the SPEAKERS

Each press cycles through the following:

button to select SP OFF.

• A – Selects the analog inputs.

The sound is heard from the headphone and no

• DIGITAL – Selects the digital inp ut. The

sound is heard from the speakers connected to

coaxial 1 input is selected for C1, and the

this receiver.

optical 1 or 2 audio input is selected for

The listening mode when the sound is heard

O1 or O2.

from the headphone can be selected only from

• HDMI – Selects an HDMI signal. H can be

STEREO or A.L.C..

selected for BD/DVD or TV/SAT input. For

2

other inputs, HDMI cannot be selected.

32

En

VSX_519V_MY.book 32 ページ ２００９年１月１６日　金曜日　午後７時３２分

1 • This receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and DTS (including DTS 96 kHz / 24 bit) digital signal

formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, SACD (DSD 2 ch), DVD Audio (including 192

kHz), PCM (32 kHz to 192 kHz sampling frequencies). With other digital signal formats, set to A (analog) (the MULTI IN or

TUNER).

• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make

the proper digital connections (page 9) and set the signal input to C1/O1/O2 (DIGITAL).

• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

2 • When the HDMI option in Setting the Audio options on page 30 is set to THRU, t

he sound will be heard t

hrough your TV, not

from this receiver.

3• During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and

channel levels can be set.

• Change the output settings of the systems with multichannel analog outputs according to the number of the speakers

connected to the receiver.