Pioneer CDJ-2000: Setting Cue Setting Loop

3 Turn the rotary selector.

Setting Cue

The auto cue level setting changes.

1 During playback, press [PLAY/PAUSEf].

 Changing procedure - [TIME MODE/

AUTO CUE]

Playback is paused.

1 Press [TIME MODE/

AUTO CUE] for at least 5 seconds.

2 Press [CUE].

The auto cue level setting changing mode is set.

The point at which the track is paused is set as the cue point. The CUE indicator

lights and the PLAY/PAUSEf indicators flashes. No sound is output at this

2 Press [CUE/

LOOP CALLc/

d].

time.

The auto cue level setting changes.

! When a new cue point is set, the previously set cue point is canceled.

! To cancel the changing mode, press [TIME MODE/

AUTO CUE] again.

! For instructions on saving cue points. see Storing cue and loop points on page 16.

Setting Loop

Adjusting the cue point position

1 During playback, press [LOOP IN/

CUE (IN ADJUST)] at the

1 Press [SEARCHm/

n] while pausing at the cue point.

position at which you want to start looping (the loop in point).

The CUE and PLAY/PAUSEf indicators flash.

Loop In Point is set.

2 Press [SEARCHm/

n].

! This operation is not necessary if you have already set a Cue Point as a Loop

The cue point can be fine-adjusted in steps of 0.5 frames.

In Point.

! The same operation is possible using the jog dial.

2 Press [LOOP OUT (OUT ADJUST)] at the position at which you

3 Press [CUE].

want to stop looping (the loop out point).

The point at which the button was pressed is set as the cue point.

The Loop Out Point is set, and Loop playback starts from the Loop In Point.

! When a new cue point is set, the previously set cue point is canceled.

! When playing music files, looping can only be set within the same track.

! When the medium containing the track is removed, the cue point is canceled. For

instructions on saving cue points. see Storing cue and loop points on page 16.

Fine-adjusting the loop in point (loop in adjust)

Returning to Cue Point (Back Cue)

1 During loop playback, press [LOOP IN/

CUE (IN ADJUST)].

[LOOP IN/

CUE (IN ADJUST)] switches to a fast flashing and [LOOP OUT

During playback, press [CUE].

(OUT ADJUST)] turns off.

The set immediately returns to the currently set cue point and pauses.

The loop in point’s time is displayed on the main unit display.

! When [PLAY/PAUSEf] is pressed, playback starts from the cue point.

2 Press [SEARCHm/

n].

The loop in point can be adjusted in units of 0.5 frames.

! The same operation is possible using the jog dial.

Checking Cue Point (Cue Point Sampler)

! The loop in point can be adjusted by ±30 frames and must be in front of the

loop out point.

Press and hold [CUE] after returning to the cue point.

Playback starts from the currently set cue point. Playback continues while [CUE]

3 Press [LOOP IN/

CUE (IN ADJUST)].

is pressed in.

! Normal loop playback resumes.

! When the music files are recorded in a folder structure, the cue point can only

! Normal loop playback also resumes if no operation is performed for over 10

be checked for tracks within the same category/

folder.

seconds.

! When playing music files, the loop in point can only be adjusted within the

same track.

Setting Cue Point during playback (Real Time

Cue)

Fine-adjusting the loop out point (loop out

adjust)

During playback, press [LOOP IN/

CUE (IN ADJUST)] at the position

at which you want to set the cue point.

1 During loop playback, press [LOOP OUT (OUT ADJUST)].

The point at which the button was pressed is set as the cue point.

[LOOP OUT (OUT ADJUST)] switches to a fast flashing and [LOOP IN/

CUE

(IN ADJUST)] turns off.

The loop out point’s time is displayed on the main unit display.

Setting auto cue

2 Press [SEARCHm/

n].

When a track is loaded or the track search operation is performed, the silent sec-

The loop out point can be adjusted in units of 0.5 frames.

tion at the beginning of the track is skipped and the cue point is automatically set

! The same operation is possible using the jog dial.

at the point immediately before the sound starts.

! The loop out point adjustment range is anywhere after the loop in point.

Press [TIME MODE/

AUTO CUE] for over 1 second.

3 Press [LOOP OUT (OUT ADJUST)].

Auto cue is turned on. [A. CUE] lights on the main unit display.

Normal loop playback resumes.

! The auto cue level setting remains in the memory, even when the power is

! Normal loop playback also resumes if no operation is performed for over 10

turned off.

seconds.

! When playing music files, the loop out point can only be adjusted within the

same track.

Changing the auto cue level

The sound pressure level for identifying a section as silent can be selected from

among the following eight steps:

Canceling Loop playback (Loop Exit)

–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB

! The auto cue level setting remains in the memory, even when the power is

During loop playback, press [RELOOP/EXIT].

turned off.

Playback continues after the Loop Out Point without returning to the Loop In

! There are two ways to change the auto cue level, as shown below.

Point.

 Changing procedure - [MENU/UTILITY]

Returning to Loop playback (Reloop)

1 Press [MENU/UTILITY] for over 1 second.

The [UTILITY] screen is displayed.

After canceling loop playback, press [RELOOP/EXIT] during

playback.

2 Select [AUTO CUE LEVEL] and enter.

Playback returns to the previously set Loop In Point, and Loop playback resumes.

15