Pioneer CDJ-2000: Loading USB devices Playback Loading discs Using the PRO DJ LINK function Loading SD memory cards

Loading USB devices

English

Playback

Insert the USB device into the USB port.

The USB indicator lights.

! When a USB device that has previously been loaded in the CDJ-2000 or a

Pioneer DJ player is loaded, the number of discs for which WAVE informa-

Loading discs

tion, etc., is recorded is displayed on the main unit display.

! Set the disc with the printed side facing up.

! Insert the disc into the disc insertion slot on the set’s front panel.

! Do not insert two or more discs at once.

Removing USB devices from the set

! Do not force discs into the set’s disc insertion slot when the set’s power is off.

Doing so could damage the disc or the set.

! Be sure to follow the procedure below when removing USB devices from the

! When the disc is being drawn in or ejected, do not apply any force to the disc in

set. Removing a USB device without following this procedure could erase the

the direction opposite its movement. Doing so could damage the disc or the set.

set’s management data and make it impossible to read the USB device.

! When turning the set’s power off, be sure to remove the USB device first.

1 Press [POWER].

Turn on the power of this unit.

1 Press [USB STOP] for over 2 second.

The USB indicator turns off.

2 Insert the disc into the disc insertion slot.

Playback starts.

2 Disconnect the USB device.

! When auto cue is turned on, playback starts when [PLAY/PAUSEf] is

pressed. For details on the auto cue function, see Setting auto cue on page 15.

Using the PRO DJ LINK function

Ejecting discs

When two or more CDJ-2000s are connected by LAN cable, tracks recorded on

SD memory cards or USB devices connected to other players can be loaded onto

this unit.

Press [DISC EJECTh].

The disc is ejected from the disc insertion slot.

1 Connect this unit and other DJ players using LAN cables.

! If [DISC EJECTh] is pressed by mistake, press [PLAY/PAUSEf] immedi-

ately. The set is restored to the status it was in just before [DISC EJECTh] was

2 Press [LINK].

pressed. (No sound is output during this time.)

Media loaded in another DJ player is displayed on this unit’s display.

! When [UNLOCK/

LOCK] is set to [LOCK], press [PLAY/PAUSEf] to set the

3 Select the medium and enter.

pause mode, then press [DISC EJECTh].

The medium’s contents are displayed.

4 Select the track and enter.

Loading SD memory cards

The track is loaded into this unit.

! The information below can be shared among DJ players connected by PRO

DJ LINK.

1 Open the SD memory card door.

— Tracks (music files)

2 Insert the SD memory card.

— TAG LIST (page 19)

Insert the SD memory card vertically, with the back side facing forward and the

— INFO (page 20)

notch facing down. Push the card in slowly until it stops.

— Disc cue points

— Disc WAVE displays

3 Close the SD memory card door.

The SD memory card indicator lights.

! When an SD memory card that has previously been loaded in the CDJ-2000 or

Sharing disc information

a Pioneer DJ player is loaded, the number of discs for which WAVE informa-

tion, etc., is recorded is displayed on the main unit display.

1 Load an SD memory card or USB device into the DJ player

connected by PRO DJ LINK.

Ejecting SD memory cards from the set

2 Load a disc in the CDJ-2000.

Do not eject SD memory cards or turn off the CDJ-2000’s power while the SD

When no SD memory card or USB device is loaded in this unit, the player number

memory card indicator is flashing. Doing so could damage the data recorded on

and check screen for DJ players in which SD memory cards or USB devices are

the card.

loaded are displayed on this unit’s display.

1 Open the SD memory card door.

3 Press [MEMORY] on this unit.

The SD memory card indicator turns off.

The disc information set for this unit is registered on the SD memory card/

USB

device of the DJ player connected by PRO DJ LINK.

2 Press the SD memory card in. When it pops back up, pull it out

! When multiple DJ players are connected by PRO DJ LINK and SD memory

vertically.

cards/

USB devices are loaded in two or more DJ players, discs are not regis-

! Do not forcibly insert or remove SD memory cards. Doing so could damage

tered in DJ players other than this one.

the SD memory card or the set.

! If [DELETE] is pressed in step 3, the disc information is not registered on any

! Do not insert any objects other than SD memory cards into the SD memory

DJ player. No disc information is registered on any DJ player until the SD

card insertion slot. Inserting coins or other metal objects could damage the

memory card/

USB device is loaded on the CDJ-2000. To register the disc

internal circuitry, resulting in malfunction.

information, press [DISC], then press [MENU/UTILITY] and select the player

in which the information is to be registered.

13