Asus VW195: Troubleshooting (FAQ)

Troubleshooting (FAQ)

Problem Possible Solution

Power LED is not ON • Press the button to check if the monitor

is in the ON mode.



connected to the monitor and the power

outlet.

The power LED lights amber and there is no



screen image

in the ON mode.

• Make sure the signal cable is properly

connected the monitor and the computer.

• Inspect the signal cable and make sure

none of the pins are bent.



available monitor to check if the computer

is properly working.

Screen image is too light or dark 

settings via OSD.



• Press the button for two seconds to

properly





settings

via OSD.

Screen image bounces or a wave pattern is

• Make sure the signal cable is properly

present in the image

connected to the monitor and the

computer.

• Move electrical devices that may cause

electrical interference.

Screen image has color defects (white does

• Inspect the signal cable and make sure

not look white)

that none of the pins are bent.

• Perform Reset via OSD.





 • Press the button for two seconds to



mode only).



OSD.

No sound or sound is low • Ensure that the audio cable is properly

connected to the monitor and the

computer.



monitor and computer.

• Ensure that the computer sound card

driver is properly installed and activated.