Asus V6-P5G31E: Installing an expansion card Installing storage drives Optical drive Floppy disk drive

Installing an expansion card

2. Remove the metal bracket lock.1. Remove the metal cover opposite the

slot that you intend to use.

1

2

3. Insert the card connector to the slot,

thenpressthecardrmlyuntilittsin

place.

3

4. Replace the metal bracket lock.

4

Installing storage drives

Optical drive

1. Place the chassis upright, then remove the upper 5.25” drive bay metal plate cover.

2. Insert the optical drive to the bay, then carefully push the drive until its screw holes

align with the holes on the bay.

3. Secure the optical drive with two screws on both sides of the bay.

4. Connect the IDE (4A) and power (4B) plugs to connectors at the back of the drive.

2

3

3

4B

4A

Floppy disk drive

If thesystemcomeswithoutaportableharddisk(optional),thenyoumayinstallaoppydisk

drive into the 3.5-inch drive bay.

1. Place the chassis upright, then remove the upper 3.5” drive bay metal plate cover.

2. Inserttheoppydiskdrivetothebay,thencarefullypushthedriveuntilitsscrewholes

align with the holes on the bay.

3. Securetheoppydiskdrivewithtwoscrewsonbothsidesofthebay.

4. Connect the signal (4A) and power (4B) plugs to connectors at the back of the drive.

4B

3

3

4A

2