Kenwood KRC-594: Safety precautions About Cassette tape

Safety precautions

About Cassette tape

Cleaning the Faceplate Terminals

Cleaning the tape head

NOTE

If the terminals on the unit or faceplate get

When there’s noise or the sound quality is bad

• If you experience problems during

dirty, wipe them with a dry, soft cloth.

during tape play the tape head maybe dirty,

installation, consult your Kenwood dealer.

English

clean the tape head.

• If the unit does not seem to be working

Cleaning the Unit

right, try pressing the reset button first. If

If the faceplate of this unit is stained, wipe it

About Cassette tape

that does not solve the problem, consult

with a dry soft cloth such as a silicon cloth.

• If the tape is slack tighten it.

your Kenwood dealer.

If the faceplate is stained badly, wipe the stain

• If the cassette tape label is peeling off glue it

•Press the reset button if the Disc auto

off with a cloth moistened with neutral

on again.

changer fails to operate correctly. Normal

cleaner, then wipe neutral detergent off.

• Don’t use deformed cassette tape.

operation should be restored.

Applying spray cleaner directly to the unit may

• Don’t place cassette tape on the dashboard

affect its mechanical parts. Wiping the

etc. where the temperature is high.

faceplate with a hard cloth or using a volatile

• Don’t use cassette tape that’s 100 minutes

liquid such as thinner or alcohol may scratch

long or longer.

the surface or erases characters.

Reset button

• Characters in the LCD may become difficult

to read in temperatures below 41 ˚F (5 ˚C).

• The illustrations of the display and the panel

appearing in this manual are examples used

to explain more clearly how the controls are

used. Therefore, what appears on the display

in the illustrations may differ from what

appears on the display on the actual

equipment, and some of the illustrations on

the display may represent something

impossible in actual operation.

— 4 —