Asus Xonar DGX: 3.2 Card installation 4. Driver installation

3.2 Card installation

Beforeyouproceedwiththefollowinginstallationsteps,it’srecommendedthat

youdisableyouronboardaudiodeviceinyourBIOSsettings,oruninstallany

otheraudiocardsonyourPC.(ForBIOSsettingoruninstallationofothersound

cards, refer to the user manuals of your motherboard and audio card.)

Installing the Xonar DGX card

1. Power OFF the computer, the monitor, and

all other peripheral devices connected to

your computer.

2. Unplug the computer power cord from your

computer and power outlet.

3. Touch the metal back or side panel of the

computer to avoid static electricity.

4. Remove the chassis cover.

5. Remove the metal bracket from an available PCIE slot for the Xonar DGX

audio card.

6. Carefully insert the audio card into the PCIE slot. Ensure the audio card sits

properly in place.

7. Secure the audio card with screws and the metal bracket.

8. Put back the chassis cover.

9. Reconnect all cables.

10. Plug the power cord to the computer and to a power outlet.

11. Power ON the computer.

4. Driver installation

Installing the Xonar DGX card driver

1. After you have installed the Xonar DGX card, turn on your computer.

®

Windows

automatically detects the audio card and searches for device

drivers. When prompted for the drivers, click Cancel.

2. Insert the support CD into the optical drive. If Autorun is enabled in your

system, the setup starts automatically. If not, run setup.exe from your

support CD.

3. Followtheonscreeninstructionstonishtheinstallation.

The version and content of the support CD are subject to change without notice.

1

2