Asus V4-M3N8200: Installing storage drives

Installing storage drives

Optical drive

1. Place the chassis upright, then

2

remove the upper 5.25” drive bay

metal plate cover.

3

English

3

2. Insert the optical drive to the bay, then

carefully push the drive until its screw

holes align with the holes on the bay.

3. Secure the optical drive with two

screws on both sides of the bay.

4. Connect the IDE (A) and power (B)

B

plugs to connectors at the back of the

drive.

A

Floppy disk drive

If the system comes without a portable hard disk (optional), then you may install a



1. Place the chassis upright, then

remove the upper 3.5” drive bay metal

plate cover.

3

 

3

then carefully push the drive until its

2

screw holes align with the holes on the

bay.

 

B

screws on both sides of the bay.

4. Connect the signal (A) and power (B)

plugs to connectors at the back of the

A

drive.

Hard disk drive

1. Remove the 3.5-inch hard drive holder

3

out of the chassis.

3

NOTE: The 3.5-inch hard drive holder

is optional.

2

2. Insert the hard disk drive to the 3.5-

inch hard drive holder, then carefully

push the drive until its screw holes align with the holes on the holder.

3. Secure the hard disk drive with two screws on both sides of the bay.

4. Replace the hard drive holder to the chassis and secure the screws.

Installation manual

9