Kenwood KRC-694: Menu system

Menu system

Menu System

Setting during operation beep sound etc. functions.

The Menu system basic operation method is explained here. The

English

reference for the Menu items and their setting content is after

this operation explanation.

1 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

2 Select the menu item

Press the [FM] or [AM] button.

Example: When you want to set the beep sound select the

"Beep"/ "BEEP" display.

3

Set the menu item

Press the [4] or [¢] button.

Example: When "Beep"/ "BEEP" is selected, each time the button

is pressed it switches "Beep ON"/ "BEEP ON" or "Beep

OFF"/ "BEEP OFF". Select 1 of them as the setting.

You can continue by returning to step 2 and setting other items.

4 Exit Menu mode

Press the [MENU] button.

When other items that are applicable to the basic operation method

above are displayed afterwards their setting content chart is

entered. (Normally the uppermost setting in the chart is the original

setting.)

Also, the explanation for items that aren't applicable (<Manual Clock

Adjustment>etc.) are entered step by step.

Security Code <In Standby mode>

Because authorization by the Security Code is required when it's

removed from the vehicle, personalizing this unit is by using the

Security Code is a help in preventing theft.

— 20 —

KRC-694(E)_U.S_r3 02.11.11 7:34 PM Page 20

KRC-694

RDS indicator

NEWS indicator

Menu display

KRC-594/594V

NEWS indicator

RDS indicator

Menu display

KRC-694(E)_U.S_r3 02.11.11 7:34 PM Page 21

When the Security Code function is activated it can't be released.

2 Do the step 4 through 7 step operation, and reenter the

Note, your Security Code is the 4 digit number entered in your "Car

security code.

Audio Passport" in this package.

"APPROVED" is displayed.

The unit can be used.

1 Enter Standby

Press the [SRC] button.

If an incorrect code is input, "Waiting"/ "WAITING" is displayed, and

Select the "ALL OFF" display.

the input prohibited time shown below is generated.

After the input prohibited time lapses, "CODE" is displayed, and

2 Enter Menu mode

input can be done.

Press the [MENU] button for at least 1 second.

Number of times Input prohibited time

When "MENU" is displayed, "Security"/ "SECURITY" is displayed.

the incorrect code was input

3 Enter Security Code mode

1—

Press the [4] or [¢] button for at least 1 second.

25 minutes

When "ENTER" is displayed, "CODE" is displayed.

31 hour

4 Select the digits to enter

4 24 hours

Press the [4] or [¢] button.

5 Select the Security Code numbers

Press the [FM] or [AM] button.

6 Repeat steps 4 and 5, and complete the Security Code.

7

Confirm the Security Code

Touch Sensor Tone

Press the [¢] button for at least 3 seconds.

Setting the operation check sound (beep sound) ON/OFF.

When "RE-ENTER" is displayed, "CODE" is displayed.

Display Setting

8 Do the step 4 through 7 step operation, and reenter the

"Beep ON"/ "BEEP ON" Beep is heard.

security code.

"Beep OFF"/ "BEEP OFF" Beep canceled.

"APPROVED" is displayed.

The Security Code function activates.

If you enter a Code different from your Security Code, you have to

start over from step 4.

Press the Reset button and when it's removed from the

battery power source

1 Turn the power ON.

— 21 —