Kenwood KRC-694: Menu system

KRC-694(E)_U.S_r3 02.11.11 7:34 PM Page 22

Menu system

Manual Clock Adjustment

DSI (Disabled System Indicator)

This adjustment can be done when the <Synchronize Clock> (page

A red indicator will blink on the unit after the faceplate is

22) is set as OFF.

removed, warning potential thieves.

English

1 Select Clock Adjustment mode

Display Setting

Press the [FM] or [AM] button.

"DSI ON" LED flashes.

Select the "Clock Adjust"/ "CLK ADJ" display.

"DSI OFF" LED OFF.

2 Enter Clock Adjust mode

Press the [4] or [¢] button for at least 1 second.

The clock display blinks.

3 Adjust the hours

Selectable Illumination

Press the [FM] or [AM] button.

Selecting the button illumination color as green or red.

Adjust the minutes

Display Setting

Press the [4] or [¢] button.

"Button Red"/ "KEY RED" The illumination color is red.

4 Exit Clock adjustment mode

"Button Green"/ "KEY GRN" The illumination color is green.

Press the [MENU] button.

Switching Display Type

Synchronize Clock

Setting the Display type.

Synchronizing the RDS station time data and this unit's clock.

Display Setting

Display Setting

"Display C"/ "DISP C" Demonstration.

"SYNC ON" Synchronizes the time.

"Display A"/ "DISP A" Normal display type.

"SYNC OFF" Adjust the time manually.

"Display B"/ "DISP B" Silent display type.

It takes 3 to 4 minutes to synchronize the clock.

Contrast Adjustment

Adjusting the display contrast.

— 22 —

KRC-694(E)_U.S_r4 02.11.18 10:32 AM Page 23

Display and Setting

Local Seek <In Tuner mode>

"Contrast 0"/ "CONT 0"

Only stations whose reception is good are searched for in auto

…

seek tuning.

"Contrast 10"/ "CONT 7"

Display Setting

"Local.S OFF"/ "LO.S OFF" The local seek function is OFF.

"Local.S ON"/ "LO.S ON" The local seek function is ON.

News Bulletin with Timeout Setting

It switches automatically when a news bulletin starts even if the

Tuning Mode <In Tuner mode>

radio isn't being listened to. Also, the time interval when

interrupt is prohibited can be set.

Sets the tuning mode.

Display and Setting

Tuning mode Display Operation

"NEWS OFF"

Auto seek "Auto 1"/ "AUTO 1" Automatic search for

"NEWS 00MIN"/"NEWS 00M"

a station.

Preset station seek "Auto 2"/ "AUTO 2" Search in order of the

…

stations in the Preset

"NEWS 90MIN"/"NEWS 90M"

memory.

When "NEWS 00MIN"/"NEWS 00M" — "NEWS 90MIN"/"NEWS

Manual "Manual"/ "MANUAL" Normal manual tuning

90M" is set, the News Bulletin Interrupt function is ON.

control.

When it's ON, the "NEWS" indicator is ON.

When the news bulletin starts, "News"/"NEWS" is displayed, and

it switches to the news bulletin.

• If you choose the "20MIN"/ "20M" setting, further news bulletins

will not be received for 20 minutes once the first news bulletin is

received.

Auto Memory Entry <In Tuner mode>

• The news bulletin volume is the same level that was set for

For the operation method refer to <Auto Memory Entry> (page

<Traffic Information> (page 12).

11).

• This function is only available if the desired station sends PTY-code

for news bulletin or belongs to <Enhanced Other Network>-

Network sending PTY-code for news bulletin.

• When the News Bulletin Interrupt function is ON, it switches to an

FM station.

— 23 —