Indesit WISE 107 X: Care and maintenance

Care and maintenance

Cutting off the water or electricity

Cleaning the pump

GB

supply

The washing machine is fitted with a self-cleaning

 Turn off the water tap after every wash. This will

pump that does not require any maintenance.

limit the wear of your appliance's water system

Sometimes, small items (such as coins or buttons)

and also prevent leaks.

may fall into the pre-chamber that protects the

pump, situated in the lower part of the same.

 Unplug your appliance when cleaning it and

during all maintenance operations.

 Make sure the wash cycle has ended and unplug

the appliance.

Cleaning your appliance

To access the pre-chamber:

The exterior and rubber parts of your appliance can

1. using a screwdriver,

be cleaned with a soft cloth soaked in lukewarm

remove the cover panel

soapy water. Do not use solvents or abrasives.

on the lower front of the

washing machine (see

figure);

Cleaning the detergent dispenser

Remove the dispenser

by pulling it out (see

figure).

Wash it under running

water; this operation

2. unscrew the lid

should be repeated

rotating it anti-

frequently.

clockwise (see figure): a

little water may trickle

out. This is perfectly

normal;

Caring for your appliance door and

drum

 Always leave the appliance door ajar to prevent

3. clean the interior thoroughly;

unpleasant odours from forming.

4. screw the lid back on;

5. reposition the panel, making sure the hooks are

securely in place before you push it onto the

appliance.

Checking the water inlet hose

Check the water inlet hose at least once a year. If

you see any cracks, replace it immediately: during

the wash cycles, water pressure is very strong and

a cracked hose could easily split open.

 Never use hoses that have already been used.

10