Kenwood KDC-U31R: AUDIO SETTINGS

AUDIO SETTINGS

While listening to any source...

LOUDNESS LOUD LV1/ LOUD LV2: Selects your preferred low and high frequencies boost

1 Press AUDIO to select

[AUD CTRL]

.

to produce a well-balanced sound at a low volume level. ; OFF: Cancels.

2 Turn the volume knob to make a selection (see the table below), then press

the knob.

BALANCE

L15 to R15 (0): Adjusts the left and right speaker output balance.

Repeat step 2 until the desired item is selected or activated.

FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.

3 Press and hold to exit.

SW SET

SW ON: Turns on the subwoofer output. ; SW OFF: Cancels.

• To return to the previous hierarchy, press

.

DTIL SET

Default:

XX

LPF SW

LPF THRU

: All signals are sent to the subwoofer. ; LPF 85HZ/ LPF 120HZ/

SW LEVEL –15 to +15 (0): Adjusts the subwoofer output level.

LPF 160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz

BASS LVL

–8 to +8 (0):

are sent to the subwoofer.

Adjusts the level to memorize for each source. (Before making

MID LVL

–8 to +8 (0):

SW PHASE PHAS REV (180°)/ PHAS NML (0°): Selects the phase of the subwoofer

an adjustment, select the source you want to adjust.)

output to be in line with the speaker output for optimum performance.

TRE LVL

–8 to +8 (0):

(Selectable only if a setting other than [LPF THRU] is selected for [LPF SW].)

EQ PRO

SPRM SET SPRM ON: Creates realistic sound by interpolating the high-frequency

BASS ADJ BASS FRQ

60/ 80/ 100/ 200: Selects the center frequency.

components that are lost in AAC/MP3/WMA audio compression. ;

SPRM OFF: Cancels. (Selectable only when playing back an AAC/MP3/WMA

BASS LVL

–8 to +8 (0): Adjusts the level.

disc or a USB device, except iPhone/iPod.)

BASS Q

1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.

V-OFFSET

–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume

BASS EXT

B-EX ON: Turns on the extended bass. ; B-EX OFF: Cancels.

(Default: 0)

adjustment level of each source. (Before adjustment, select the source you

want to adjust.)

MID ADJ MID FRQ

0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency.

•

[SW LEVEL]

/

[SW SET]

/

[LPF SW]

/

[SW PHASE]

is selectable only if

[SWPRE]

is set to

MID LVL

–8 to +8 (0): Adjusts the level.

[SWPRE SW]

. (➜

4

)

MID Q

0.75/ 1.00/ 1.25: Adjusts the quality factor.

•

[SW LEVEL]

/

[LPF SW]

/

[SW PHASE]

is selectable only if

[SW SET]

is set to

[SW ON]

.

TRE ADJ TRE FRQ

10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center frequency.

TRE LVL

–8 to +8 (0): Adjusts the level.

EQ

NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects

a preset equalizer suitable to the music genre. (Select [USER] to use the

customized bass, middle, and treble settings.)

B. BOOST

BB-L LV1/

BB-L

LV2/

BB-L

LV3: Selects your preferred bass boost level. ;

BB-L OFF: Cancels.

8

EN_KDC-U41R[E]2.indd 8EN_KDC-U41R[E]2.indd 8 8/14/12 3:05:52 PM8/14/12 3:05:52 PM