Indesit PI 604: Maintenance and care

Maintenance and care

Switching the appliance off

Assistance

GB

Disconnect your appliance from the electricity supply

Communicating:

before carrying out any work on it.

• appliance model (Mod.)

• serial number (S/N)

This information is found on the data plate located on

Cleaning the appliance

the appliance and/or on the packaging.

! Do not use abrasive or corrosive detergents, stain

Technical characteristic

removers, anti-rust products, powder detergents or

sponges with abrasive surfaces: these may scratch

the surface.

DATA PLATE

voltage: 230V/400V 3N ~ 50/60Hz

Electrical section

! Never use steam cleaners or pressure cleaners on

Max power 7000 W

the appliance.

• It is usually enough to wash the hob with a damp

sponge and dry it with absorbent kitchen roll.

• The electric hobs should be cleaned using a damp

cloth and then rubbed with oil while still warm.

• Stainless steel may become marked if it comes into

contact with very hard water or harsh detergents

(containing phosphorous) for long periods of time.

After cleaning, it is advisable to rinse thoroughly

and dry. It is also recommended that drops of water

be dried.

13

following European Economic

Community directives:

- 2006/95/EEC of 12/12/06 (Low

Voltage) and subsequent

amendments;

- 2004/108/EEC of 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments;

- 93/68/EEC of 22/07/93 and

subsequent amendments.

- 2002/96/EC and subsequent

amendments.