Kenwood KDC-3657SD: GETTING STARTED

GETTING STARTED

3

Set the initial settings

1 Press SRC to enter

[STANDBY]

.

2 Press the volume knob to enter

[FUNCTION]

.

3 Turn the volume knob to select

[INITIAL SET]

, then press the knob.

4 Turn the volume knob to make a selection (see the table below), then press

the knob.

1

Cancel the demonstration

5 Press and hold to exit.

• To return to the previous hierarchy, press .

When you turn on the power (or after you reset the unit), the display

Default:

XX

shows: “CANCEL DEMO” \ “PRESS” \ “VOLUME KNOB”

PRESET TYPE NORMAL/ NORM: Memorizes one station for each preset button in each band (FM1/

1 Press the volume knob.

FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for each preset button regardless

[YES]

is selected for the initial setup.

of the selected band.

2 Press the volume knob again.

“DEMO OFF” appears.

KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.

RUSSIAN SET

ON: Folder name, file name, song title, artist name, album name are displayed in

2

Russian (if applicable). ; OFF: Cancels.

Set the clock

P-OFF WAIT Applicable only when the demonstration mode is turned off.

1 Press the volume knob to enter

[FUNCTION]

.

Sets the duration when the unit will automatically turns off (while in standby mode)

2 Turn the volume knob to select

[SETTINGS]

, then press the knob.

to save the battery.

3 Turn the volume knob to select

[CLOCK]

, then press the knob.

––– : Cancels ; 20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes

4 Press the volume knob to select

[CLOCK ADJUST]

/

[CLOCK ADJ]

.

BUILT-IN AUX/

ON: Enables AUX in source selection. ; OFF: Disables. (

➜

7)

5 Turn the volume knob to adjust the hour, then press the knob.

BUILTIN AUX

6 Turn the volume knob to adjust the minute, then press the knob.

Press 4

/

¢ to move between the hour and minute adjustment.

CD READ

1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play

7 Press and hold to exit.

as a music CD. No sound can be heard if an audio file disc is played.

(or)

SWITCH PRE

For

KDC

-

3657SD

:

REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the

Press and hold SCRL DISP to enter clock adjustment mode directly

line out terminals on the rear (through an external amplifier).

while in clock display screen.

Then, perform steps 5 and 6 above to set the clock.

SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or

4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.

F/W UPDATE

F/W UP xx.xx

YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

4

EN_KDC-4757SD[E0]1.indd 4EN_KDC-4757SD[E0]1.indd 4 8/14/12 3:38:33 PM8/14/12 3:38:33 PM