Kenwood KDC-3657SD: AUDIO SETTINGS

AUDIO SETTINGS

While listening to any source...

BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass

1 Press the volume knob to enter

[FUNCTION]

.

boost level. ; OFF: Cancels.

2 Turn the volume knob to select

[AUDIO CONTROL]

/

[AUDIO CTRL]

, then press the

LOUDNESS

LOUDNESS LV1/ LOUD LV1/ LOUDNESS LV2/ LOUD LV2: Selects your

knob.

preferred low and high frequencies boost to produce a well-balanced sound at

3 Turn the volume knob to make a selection (see the following table), then

a low volume level. ; OFF: Cancels.

press the knob.

BALANCE

L15 to R15 (0): Adjusts the left and right speaker output balance.

Repeat step 3 until the desired item is selected or activated.

4 Press and hold to exit.

FADER

R15 to F15 (0): Adjusts the rear and front speaker output balance.

• To return to the previous hierarchy, press .

SUBWOOFER

ON: Turns on the subwoofer output. ; OFF: Cancels.

SET/ SUB-W SET

Default:

XX

DETAILED SET/ DETAIL SET

SUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.

HPF

For

KDC

-

4757SD

:

BASS LEVEL

–8 to +8 (0):

THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/

Adjusts the level to memorize for each source. (Before making

MID LEVEL –8 to +8 (0):

150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150 Hz

an adjustment, select the source you want to adjust.)

are sent to the speakers.

TRE LEVEL –8 to +8 (0):

EQ PRO

LPF SUBWOOFER/

THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/

LPF SUB-W

160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are

BASS ADJUST BASS CTR FRQ/

60/ 80/ 100/ 200: Selects the center frequency.

sent to the subwoofer.

BASS C FRQ

SUB-W PHASE

REVERSE/ REV (180°)/ NORMAL/ NORM (0°): Selects the phase of

BASS LEVEL –8 to +8 (0): Adjusts the level.

the subwoofer output to be in line with the speaker output for optimum

BASS Q FACTOR/

1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.

performance. (Selectable only if a setting other than [THROUGH] is selected

BASS Q FCTR

for [LPF SUBWOOFER]/ [LPF SUB-W].)

BASS EXTEND

ON: Turns on the extended bass. ; OFF: Cancels.

SUPREME SET

ON: Creates realistic sound by interpolating the high-frequency components

MID ADJUST MID CTR FRQ/

0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency.

that are lost in AAC/MP3/WMA audio compression. ; OFF: Cancels. (Selectable

MID C FRQ

only when playing back an AAC/MP3/WMA disc, a USB device or an SD card,

except iPhone/iPod.)

MID LEVEL –8 to +8 (0): Adjusts the level.

VOLUME OFFSET/

–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume

MID Q FACTOR/

0.75/ 1.00/ 1.25: Adjusts the quality factor.

VOL OFFSET

adjustment level of each source. (Before adjustment, select the source you

MID Q FCTR

(Default: 0)

want to adjust.)

TRE ADJUST TRE CTR FRQ/

10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center frequency.

•

[SUB-W LEVEL]

/

[SUBWOOFER SET]

/

[SUB-W SET]

/

[LPF SUBWOOFER]

/

[LPF SUB-W]

/

TRE C FRQ

[SUB-W PHASE]

is selectable only if

[SWITCH PRE]

is set to

[SUB-W]

. (➜

4

)

TRE LEVEL –8 to +8 (0): Adjusts the level.

•

[SUB-W LEVEL]

/

[LPF SUBWOOFER]

/

[LPF SUB-W]

/

[SUB-W PHASE]

is selectable only if

PRESET EQ

NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects

[SUBWOOFER SET]

/

[SUB-W SET]

is set to

[ON]

.

a preset equalizer suitable to the music genre. (Select [USER] to use the

customized bass, middle, and treble settings.)

8

EN_KDC-4757SD[E0]2.indd 8EN_KDC-4757SD[E0]2.indd 8 8/23/12 5:54:42 PM8/23/12 5:54:42 PM