Indesit PWDE 7125 S: How to run a wash cycle or a drying cycle

How to run a wash cycle or a

drying cycle

1. SWITCH THE MACHINE ON. Press the

If your laundry load to be washed and dried is

GB

button; the START/PAUSE indicator light will flash

much greater than the maximum stated load (see

slowly in a blue colour.

adjacent table of programmes), perform the wash

cycle, and when the cycle is complete, divide the

2. LOAD THE LAUNDRY. Open the porthole door.

garments into groups and put some of them back

Load the laundry, making sure you do not exceed

in the drum. At this point, follow the instructions

the maximum load value indicated in the table of

provided for a "Drying only" cycle. Repeat this

programmes and wash cycles on the following page.

procedure for the remainder of the load.

3. MEASURE OUT THE DETERGENT. Pull out the

A cooling-down period is always added to the end

detergent dispenser drawer and pour the detergent

of each drying cycle.

into the relevant compartments as described in

Drying only

Detergents and laundry.

Use the cycle selector knob to select a drying cycle

4. CLOSE THE DOOR.

(11-12-13) in accordance with the type of fabric.

The desired drying level or time may also be set

5. SELECT THE WASH CYCLE. Use the WASH

using the DRYING button

.

CYCLE SELECTOR knob to select the desired wash

cycle. A temperature and spin speed is set for each

Modify the cycle settings.

wash cycle; these values may be adjusted. The

 Press the button to enable the option; the indicator

duration of the cycle will appear on the display.

light corresponding to the button will switch on.

 Press the button again to disable the option; the

6. CUSTOMISE THE WASH CYCLE. Use the

indicator light will switch off.

relevant buttons:

 If the selected option is not compatible with the

Modify the temperature and/or spin

set wash cycle, the indicator light will flash and the

speed. The machine automatically displays the

option will not be activated.

maximum temperature and spin speed values set for

 If the selected option is not compatible with a

the selected cycle, or the most recently-used settings

previously selected one, the indicator light

if they are compatible with the selected cycle. The

corresponding to the first function selected will flash

temperature can be decreased by pressing the

and only the second option will be activated; the

button, until the cold wash OFF setting is reached.

indicator light for the option which has been

The spin speed may be progressively reduced by

activated will be illuminated.

pressing the

button, until it is completely excluded

Note: if the SMART option has been selected,

(the OFF setting). If these buttons are pressed

none of the incompatible options may be activated.

again, the maximum values are restored.

 The options may affect the recommended load

Setting the drying cycle

value and/or the duration of the cycle.

The first time the button

is pressed, the machine

7. START THE WASH CYCLE. Press the START/

will automatically select the maximum drying cycle

PAUSE button. The corresponding indicator light will

which is compatible with the selected wash cycle.

turn blue, remaining lit in a fixed manner, and the

Subsequent presses will decrease the drying level and

door will be locked (the DOOR LOCKED

symbol

then the drying time, until the cycle is excluded

will be lit). To change a wash cycle while it is in

completely ("OFF"). If these buttons are pressed

progress, pause the washer-dryer using the

again, the maximum values are restored.

START/PAUSE button (the START/PAUSE indicator

Drying may be set as follows:

light will flash slowly in an amber colour); then

A- Based on the desired laundry dryness level:

select the desired cycle and press the START/

Iron: suitable for clothes which will need ironing

PAUSE button again. To open the door while a

afterwards. the remaining dampness softens

cycle is in progress, press the START/PAUSE

creases, making them easier to remove. "A1"

button; if the DOOR LOCKED

symbol is switched

appears on the display.

off the door may be opened. Press the START/

Hanger: ideal for clothes which do not need to be

PAUSE button again to restart the wash cycle from

dried fully. "A2" appears on the display.

the point at which it was interrupted.

Cupboard: suitable for laundry which can be put

8. THE END OF THE WASH CYCLE. This will be

back in a cupboard without being ironed. "A3"

indicated by the text END on the display; when

appears on the display.

the DOOR LOCKED

symbol switches off the door

Extra: suitable for garments which need to be dried

may be opened. Open the door, unload the laundry

completely, such as sponges and bathrobes. "A4"

and switch off the machine.

appears on the display.

B - Based on a set time period: between 30 and 180

 If you wish to cancel a cycle which has already

minutes (Max. load 4 kg).

begun, press and hold the button. The cycle will be

stopped and the machine will switch off.

6