Dell LATITUDE D400: AC Adapter: Dell™Latitude™CS/CS

AC Adapter: Dell™Latitude™CS/CS: Dell LATITUDE D400

Back to Contents Page

AC Adapter: Dell™Latitude™CS/CS

x

Portable Computers User's Guide

Using the AC Adapter

The AC adapter converts AC power to the DC power required by the computer. The AC adapter kit includes the AC adapter with its attached DC

cable (which inputs power to the computer) as well as an AC power cable that connects to an electrical outlet.

You can connect the AC adapter with your computer either turned on or off.

The AC adapter works with electrical outlets worldwide. However, power connectors vary among countries. Before you use AC power in a foreign

country, you may need to obtain a new power cable designed for use in that country.

If the computer is docked to one of Dell's C/Port Family Advanced Port Replicators (APR) or C/Dock Family Expansion Stations, it obtains power

through the APR or expansion station, which must be connected to an electrical outlet.

Connecting the AC Adapter

1. ConnecttheACadapter'sattachedcableintothecomputer'sACadapterconnector(seeFigure 1).

2. Plug the AC power cable into the other end of the AC adapter.

3. Plug the AC power cable into an electrical outlet.

Figure 1. Connecting the AC Adapter

Turning On the Computer

To turn on the computer, press the power button.

Back to Contents Page

Using the AC Adapter

Connecting the AC Adapter

Turning On the Computer

NOTE: If you are running your computer on AC power with a battery installed, the AC adapter charges the battery (if needed) and then

maintains the battery's charge.

NOTICE: The AC adapter should be in a ventilated area, such as on a desktop or on the floor, when used to power the computer or

charge the battery. Do not use the AC adapter in a poorly ventilated environment, such as inside a carrying case.

1

ACadapter

2

AC adapter's attached cable

3

AC adapter connector

4

AC power cable

NOTE: If your computer's operating system is "locked up"that is, it does not respond to commandspress and hold down the power

button for at least five seconds to turn off the computer.

Оглавление