Dell UPS 3750R: инструкция

Dellt Online Rack

External Battery Module

for use with

3750W and 4200W

UPS models

Getting Started With

Your System

Démarrer avec Votre Système

Erste Schritte mit Ihrem System

Начало работы с системой

Introducción de su Sistema

系统使用 入门指南

系統使用 入門指南

사용자 시스템 시작하기

はじめに システムについて

K804N, H952N, J730N, K805N

J739N

www.dell.com | support.dell.com

Dellt Online Rack

External Battery Module

for use with

3750W and 4200W

UPS models

Getting Started

With Your System

K804N, H952N, J730N, K805N

J739N

www.dell.com | support.dell.com

Notes and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your software.

DANGER: A DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING: A WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or

injury.

CAUTION: A CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury or in property damage incidents.

DANGER: Observe the following instruction to help prevent an imminently hazardous situation which, if not

avoided, will result in death or serious injury:

S This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by

AUTHORIZED SERVICE PERSONNEL ONLY.ThereareNO USER SERVICEABLE PARTS

inside the UPS.

Information in this document is subject to change without notice.

E 2009 Dell Inc. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.

Other trademarks and trade names may b e used in this document to refer to either the entities claiming the marks and names or their

products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

July 2009

Finding Information

CAUTION: The Safety, Environmental, and Regulatory Information document provides important safety and

regulatory information.

What are You Looking For?

Find It Here

S The user's guide for my UPS

Dell UPS Disc

S The user's guide for the Dell Network Management

Card

S Dell UPS Management Software

NOTE: Documentation and software updates can be

found at

support.dell.com.

S Specifications

Dell UPS User's Guide

S How to configure UPS settings

The user's guide is available on the Dell UPS disc and

S How to troubleshoot and solve problems

on support.dell.com.

S How to install REPO control

S Safety instructions

Safety, Environmental, and Regulatory Information

S Regulatory information

S Recycling information

S Warranty information

Dell Warranty and Support Information

S Terms and Conditions (U.S. only)

S End User License Agreement

S Support information Dell Support Website — support.dell.com

NOTE: Select your region or business segment to view

the appropriate support site.

Finding Information

|

3

Installation and Startup

CAUTION: Before performing the procedures in this document, read and follow the safety instructions and

important regulatory information in your Safety, Environmental, and Regulatory Information document.

Unpacking the External Battery Module

1 Open the outer carton and remove the accessories packaged with the cabinet.

4

|

Installation and Startup

Lifting the Cabinet

CAUTION: The cabinet is heavy (53 kg/116.8 lb). Lifting the cabinets into the rack requires a minimum of two

people.

1 Withonepersononeachside,carefullyliftthecabinet out of the outer carton using the handles

on the cardboard and set it on a flat, stable surface.

2 Discard or recycle the packaging in a responsible manner, or store it for future use.

Installation and Startup

|

5

Rackmount Setup

CAUTION: The cabinet is heavy (53 kg/116.8 lb). Lifting the cabinets into the rack requires a minimum of two

people.

Installing the Rails

NOTE: The instructions are the same for square-hole racks and unthreaded, round-hole racks. The rails fit both

rack styles. The round-hole rack is shown in the illustrations.

1 Select the proper holes in the rail for positioning the cabinet in the desired location in the rack.

The rails should be located at the bottom of the 3U space allocated for the EBM.

2 Position the end of the left and right rails labeled FRONT facing inward.

6

|

Installation and Startup

3 Attach the rails to the rack:

Engage the back end of the rail until it fully seats on the vertical rack flange and the hook latch

locks in place.

Pull the rail toward the front.

Push the front end of the rail until it fully seats on the vertical rack flange and the hook latch locks

in place.

Installing the Cabinet

NOTE: Install the EBM directly below the UPS.

4 Slide the cabinet into the rack.

Installation and Startup

|

7