Pioneer PLASMA DISPLAY: Option2 Settings Menu

English

OSD (On Screen Display) Controls

19

En

Option2 Settings Menu

Setting the power management for computer

images

This energy-saving (power management) function

automatically reduces the monitor’s power consumption

if no operation is performed for a certain amount of time.

Example: Turning the power management function on

Set “ADVANCED OSD” to “ON” in the main menu (1/

2), then perform the following operations.

On “PWR. MGT.” of “OPTION2” menu, select “ON”.

OPTION2

2 / 3

        PREVIOUS PAGE

PWR. MGT.

PURECINEMA

LONG LIFE

SIDE MASK

S1/S2

DVI SET-UP

        NEXT PAGE

:     

ON

:     ON

:     3

:     OFF

SEL.

ADJ.

EXIT RETURN

Information

 Power management function

* The power management function automatically reduces

the monitor’s power consumption if the computer’s

keyboard or mouse is not operated for a certain amount

of time. This function can be used when using the

monitor with a computer.

* If the computer’s power is not turned on or if the

computer and selector tuner are not properly connected,

the system is set to the off state.

* For instructions on using the computer’s power

management function, refer to the computer’s operating

instructions.

 Power management settings

ON:

 In this mode the power management function is

turned on.

OFF:

 In this mode the power management function is

turned off.

 Power management function and STANDBY/

ON indicator

The STANDBY/ON indicator indicates the status of

the power management function. See below for

indicator status and description.

STANDBY/ON indicator

Power

management

mode

On

Off

Turning the picture

back on

Picture already on.

Operate the keyboard or

mouse. The picture

reappears.

STANDBY/

ON indicator

Green

Red

Power

management

operating status

Not activated.

Activated.

Description

Horizontal and vertical

synchronizing signals

are present from the

computer.

Horizontal and/or

vertical synchronizing

signals are not sent

from the computer.

Setting the picture to suit the movie

The film image is automatically discriminated and

projected in an image mode suited to the picture.

[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I

(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]

Example: Setting the “PURECINEMA” to “OFF”

Set “ADVANCED OSD” to “ON” in the main menu (1/

2), then perform the following operations.

On “PURECINEMA” of “OPTION2” menu, select “OFF”.

OPTION2

2 / 3

:     OFF

:     

OFF

:     3

:     OFF

SEL.

ADJ.

        PREVIOUS PAGE

PWR. MGT.

PURECINEMA

LONG LIFE

SIDE MASK

S1/S2

DVI SET-UP

        NEXT PAGE

EXIT RETURN

Information

 PURECINEMA

ON:

 Automatic discrimination of the image and

projection in PURECINEMA.

OFF:

 PURECINEMA does not function.

Reducing burn-in of the screen

The brightness of the screen, the position of the picture,

positive/negative mode and screen wiper are adjusted to

reduce burn-in of the screen.

Set “ADVANCED OSD” to “ON” in the main menu (1/

2), then perform the following operations.

On “OPTION2” menu, select “LONG LIFE”, then press the

MENU/SET button.

The “LONG LIFE” screen appears.

LONG LIFE

ABL

ORBITER

INVERSE

SCREEN WIPER

SOFT FOCUS

:     

AUTO

:     OFF

:     OFF

:     OFF

:     OFF

SEL.

ADJ.

EXIT RETURN

ABL (Auto Brightness Limiter)

Use this to activate the brightness limiter.

Example: Setting “ABL” to “LOCK1”

On “ABL” of “LONG LIFE” menu, select “LOCK1”.

LONG LIFE

ABL

ORBITER

INVERSE

SCREEN WIPER

SOFT FOCUS

:     

LOCK1

:     OFF

:     OFF

:     OFF

:     OFF

SEL.

ADJ.

EXIT RETURN

Information

 ABL settings

AUTO:

 The brightness of the screen is adjusted

automatically to suit the picture quality.

LOCK1, 2, 3:

 Sets maximum brightness.

The brightness level decreases in the order of LOCK 1,

2, 3. LOCK 3 provides minimum brightness.