Pioneer PDA-V100HD: Connecting the unit to a Pioneer plasma television (see Chapter 8)
Connecting the unit to a Pioneer plasma television (see Chapter 8): Pioneer PDA-V100HD
Table of contents
- IMPORTANT
- VENTILATION CAUTION STANDBY/ON Button Operating Environment
- Contents
- Chapter 1 Important user information
- Chapter 2 Safety precautions
- Chapter 3 Features Supported Plasma Televisions
- Chapter 4 Supplied accessories
- Chapter 5 Part names
- Rear
- Remote control unit
- Chapter 6 Preparation Installing the unit Preparing the remote control unit
- Operating range of the remote control unit
- Chapter 7 Using the unit Operation modes Operations/Operation restrictions HDMI Control setting
- Connecting the unit to a Pioneer plasma television (see Chapter 8)
- Chapter 8 Using the unit with a Pioneer plasma television
- Chapter 9 Using the unit with other televisions
- Chapter 10 Advanced functions Connecting control cables
- Changing settings Changing HDMI output resolution Selecting the colour system Selecting the INPUT3 source signal Item Description
- Setting the video signal format Setting the audio signal when using HDMI input
- Chapter 11 Using with other components Connections to a television Connections to input components
- Using the HDMI input Connections to a HDMI- supported component About HDMI
- Connections to a component equipped with SCART connector Connections to a component with component connectors
- Chapter 12 Additional information Troubleshooting Problem Possible solution
- Problem Possible solution
- SCART pin assignments
- Specifications
- Operation of the unit’s indicators During normal operation PDP combination mode Independent 1 mode
- Independent 2 mode During setting mode When setting HDMI output resolution (when RESOLUTION button is pressed.) When setting colour system for analog signals (when COLOUR SYSTEM button is pressed.)
- When selecting INPUT 3 source signal (when SIGNAL SELECT button is pressed.) When setting HDMI video signal format (when VIDEO button is pressed.) When setting HDMI audio signal format (when AUDIO button is pressed.) Unsupported settings (when a remote control unit button not supported by currently selected input is pressed.)
Using the unit
07
15
En
English
Connecting the unit to a Pioneer plasma television (see Chapter 8)
Operations, indicators, conditions, and precautions when connecting the unit to a Pioneer plasma television are as
follows:
* See the section
Features
(page 7) regarding the model numbers of supported Pioneer plasma televisions.
Connecting the unit to other televisions (see Chapter 9)
Operations, indicators, conditions, and precautions when using the unit as an AV selector are as follows:
Independent 2 mode
Operations:
• HDMI Control function is not used.
• The unit does not operate in linkage to other components,
but as an independent component.
• The
INPUT
button on PDA-V100HD and its remote control
unit can be used to switch the unit’s corresponding
INPUT 1 to INPUT 6.
Settings required on this unit:
HDMI CONTROL
switch:
OFF
Operations
• The plasma television’s remote control can be used to control the unit’s input selector.
• The unit’s power switch is linked to that of the plasma television; when the plasma television’s power
switch is set to off, this unit’s power is also automatically turned off.
Indicators
The HDMI CONTROL indicator lights green.
Conditions
• The
HDMI CONTROL
switch must be set to
ON
.
• The plasma television’s “HDMI Control Setting” menu must be set to allow control of this unit.
Note: For setting details, consult the Operating Instructions for your plasma television.
Precautions
• The
INPUT
button and the remote control’s
INPUT
(
1
to
6
) buttons cannot be used to change the
unit’s input selection.
• The input selection for the component connected to INPUT 6 connector cannot be changed.
• If the
HDMI CONTROL
switch is set from
ON
to
OFF
, be sure also to cancel the plasma television’s
“HDMI Control Setting”.
Operations
• The
INPUT
button and remote control’s
INPUT
(
1
to
6
) buttons can be used to change the unit’s input
selection.
Indicators
The HDMI CONTROL indicators do not light.
Conditions
• The
HDMI CONTROL
switch must be set to
OFF
.
Precautions
• The plasma television’s remote control cannot be used to control the unit’s input selector.
Operation modes
Operations/Operation restrictions
HDMI Control setting
