Pioneer PDA-V100HD: Chapter 11 Using with other components Connections to a television Connections to input components
Chapter 11 Using with other components Connections to a television Connections to input components: Pioneer PDA-V100HD
Table of contents
- IMPORTANT
- VENTILATION CAUTION STANDBY/ON Button Operating Environment
- Contents
- Chapter 1 Important user information
- Chapter 2 Safety precautions
- Chapter 3 Features Supported Plasma Televisions
- Chapter 4 Supplied accessories
- Chapter 5 Part names
- Rear
- Remote control unit
- Chapter 6 Preparation Installing the unit Preparing the remote control unit
- Operating range of the remote control unit
- Chapter 7 Using the unit Operation modes Operations/Operation restrictions HDMI Control setting
- Connecting the unit to a Pioneer plasma television (see Chapter 8)
- Chapter 8 Using the unit with a Pioneer plasma television
- Chapter 9 Using the unit with other televisions
- Chapter 10 Advanced functions Connecting control cables
- Changing settings Changing HDMI output resolution Selecting the colour system Selecting the INPUT3 source signal Item Description
- Setting the video signal format Setting the audio signal when using HDMI input
- Chapter 11 Using with other components Connections to a television Connections to input components
- Using the HDMI input Connections to a HDMI- supported component About HDMI
- Connections to a component equipped with SCART connector Connections to a component with component connectors
- Chapter 12 Additional information Troubleshooting Problem Possible solution
- Problem Possible solution
- SCART pin assignments
- Specifications
- Operation of the unit’s indicators During normal operation PDP combination mode Independent 1 mode
- Independent 2 mode During setting mode When setting HDMI output resolution (when RESOLUTION button is pressed.) When setting colour system for analog signals (when COLOUR SYSTEM button is pressed.)
- When selecting INPUT 3 source signal (when SIGNAL SELECT button is pressed.) When setting HDMI video signal format (when VIDEO button is pressed.) When setting HDMI audio signal format (when AUDIO button is pressed.) Unsupported settings (when a remote control unit button not supported by currently selected input is pressed.)
Using with other components
11
21
En
English
Chapter 11
Using with other components
Connections to a television
Televisions supporting HDMI (High-Definition
Multimedia Interface) can be connected.
Note
• When connecting this unit to a Pioneer plasma
television supporting linked settings, set the rear
panel
HDMI CONTROL
switch to
ON
. When
connecting a television made by another
manufacturer, set the
HDMI CONTROL
switch to
OFF
. (See page 10.)
• During PDP combination mode, input selection on
the component connected to INPUT 6 cannot be
selected, since the remote control unit supplied
with the Pioneer plasma television is not furnished
with an
INPUT 6
button.
Connections to input
components
You can connect many types of input components to
the unit, like a plasma television, BD player, DVD player,
DVD recorder, set-top boxes, VCR, game console,
camcorder etc.
To view images from an input component, select the
input source using the
INPUT
(
1
to
6
) buttons on the
remote control unit (see page 11). During PDP
combination mode, use the plasma television’s remote
control unit to switch between inputs.
Caution
• To protect all components, always unplug the unit
from the power outlet before connecting to a
plasma television, BD player, DVD player, DVD
recorder, set-top boxes, VCR, game console,
camcorder or other components.
• Two or more units cannot be connected
simultaneously.
HDMI compliant
cable
Television
Input component
HDMI compliant
cable
Rear view
HDMI
OUTPUT
INPUT 1
INPUT 3
INPUT 4
INPUT 6
INPUT 1
INPUT 2
HDMI
CONTROL
SERVICE ONLY
CONTROL
COMPONENT
VIDEO
AUDIO
L
R
L
R
AUDIO
I N
OUT
Y
PB
PR
ON/OFF
INPUT 3
INPUT 4
AUDIO
L
R
INPUT 5
S-VIDEO
VIDEO
R-AUDIO-L
AC IN
