Pioneer PDA-V100HD: Chapter 6 Preparation Installing the unit Preparing the remote control unit
Chapter 6 Preparation Installing the unit Preparing the remote control unit: Pioneer PDA-V100HD
Table of contents
- IMPORTANT
- VENTILATION CAUTION STANDBY/ON Button Operating Environment
- Contents
- Chapter 1 Important user information
- Chapter 2 Safety precautions
- Chapter 3 Features Supported Plasma Televisions
- Chapter 4 Supplied accessories
- Chapter 5 Part names
- Rear
- Remote control unit
- Chapter 6 Preparation Installing the unit Preparing the remote control unit
- Operating range of the remote control unit
- Chapter 7 Using the unit Operation modes Operations/Operation restrictions HDMI Control setting
- Connecting the unit to a Pioneer plasma television (see Chapter 8)
- Chapter 8 Using the unit with a Pioneer plasma television
- Chapter 9 Using the unit with other televisions
- Chapter 10 Advanced functions Connecting control cables
- Changing settings Changing HDMI output resolution Selecting the colour system Selecting the INPUT3 source signal Item Description
- Setting the video signal format Setting the audio signal when using HDMI input
- Chapter 11 Using with other components Connections to a television Connections to input components
- Using the HDMI input Connections to a HDMI- supported component About HDMI
- Connections to a component equipped with SCART connector Connections to a component with component connectors
- Chapter 12 Additional information Troubleshooting Problem Possible solution
- Problem Possible solution
- SCART pin assignments
- Specifications
- Operation of the unit’s indicators During normal operation PDP combination mode Independent 1 mode
- Independent 2 mode During setting mode When setting HDMI output resolution (when RESOLUTION button is pressed.) When setting colour system for analog signals (when COLOUR SYSTEM button is pressed.)
- When selecting INPUT 3 source signal (when SIGNAL SELECT button is pressed.) When setting HDMI video signal format (when VIDEO button is pressed.) When setting HDMI audio signal format (when AUDIO button is pressed.) Unsupported settings (when a remote control unit button not supported by currently selected input is pressed.)
Preparation
06
12
En
Chapter 6
Preparation
Installing the unit
Caution
•
Do not place a VCR or any other device on the
top of the unit.
•
When installing, allow enough space on the
sides and above the unit.
•
Do not block the side ventilation opening or the
rear exhaust opening of the unit.
Caution
• Placing the unit alone in the vertical position can
result in product damage and malfunction.
Preparing the remote control
unit
Inserting batteries
1
Open the battery cover.
2
Load the supplied two AA size batteries while
inserting their respective negative polarity (–) ends
first.
Place batteries with their terminals corresponding to
the (+) and (–) indicators in the battery compartment.
3
Close the battery cover.
PDA-V100HD
1
2
3
4
5
6
STANDBY
STANDBY/ON
INPUT
INPUT
Over 5 cm
Over 5 cm
Over 5 cm
Over 10 cm
Exhaust
opening
Ventilation
opening
PDA-V100HD
12
34
5
6
ST
ANDBY
ST
ANDBY/ON
