Yamaha BRX-610: ADVANCED PLAYBACK OPERATION

ADVANCED PLAYBACK OPERATION

■ Using the feature of BD-Live™

3 Press 5/a or number buttons to set/adjust the value

of the focused item, and press ENTER to jump to the

1 Set the Network setting (p. 36).

specified point.

2 Connect the USB memory device to this unit (p. 15).

4 To close the status bar, press STATUS.

• BD-Live data is saved in a USB memory device

connected to this unit.

Enjoying BONUSVIEW™ and BD-

• Connect a USB memory device (2 GB or greater

Live™

and formatted with FAT 32/16) supporting USB

2.0 High Speed (480 Mbit/s) to the USB port that

This unit supports BONUSVIEW (p. 50) (BD-ROM

you select on Local Storage (p. 35). The default

Profile 1 Version 1.1) and BD-Live (p. 50) (BD-ROM

setting is the USB port on the rear panel.

Profile 2) playback functions.

• A “BUDA” folder is created automatically in the

USB memory device when necessary.

Note

• If there is insufficient storage space, the data will

not be copied/downloaded. Delete unneeded data

Functions and playback method vary depending on the disc.

Refer to the guidance on the disc or the supplied user’s manual.

or use a new USB memory device.

• Some time may be required for the data to load

■ Using Picture in Picture function

(read/write).

(secondary audio/video playback)

OPERATIONS

BD-Video that includes secondary audio and video

3 Play back the disc.

compatible with Picture in Picture can be played back

4 Run BD-Live according to the instructions on the

with secondary audio and video simultaneously as a small

disc.

video in the corner.

Primary video Secondary video

Notes

• Regarding playback method of BD-Live contents, etc.,

perform the operations in accordance with the instructions

in the BD disc manual.

• To enjoy BD-Live functions, perform the network

connection (p. 15) and Network settings (p. 36).

• Refer to “[BD-Live Connection]” (p. 36) regarding the

setup to restrict access to BD-Live contents.

• The time required to download the provided programs into

the USB memory device connected to this unit varies

1 While PIP Mark ( ) or Secondary Audio Mark

depending on the internet connection speeds and the data

( ) is displayed, press PIP to turn the Picture in

volume of the programs.

Picture function on/off.

• BD-Live programs provided through the internet may not

be able to display the connection depending on the status

Notes

(upgrading) of the provider. In such cases, take out the

• To listen to secondary audio from a TV connected with an

disc and try again.

HDMI cable, make sure that the Audio Output setting (HDMI)

• If the BD-Live screen does not appear for a while after

is set to [PCM] (p. 39).

you select the BD-Live function in the BD disc menu, the

• Depending on the disc, to listen to secondary audio, you may

USB memory device may not have enough free space. In

need to set secondary audio to on from the top menu of the disc

such cases, eject the disc from this unit, and then erase the

(p. 8).

data in the USB memory device selecting [Format] in

• The secondary audio and video for Picture in Picture may

[Local Storage] (p. 35).

automatically play back and be removed depending on the

content. Also, playable areas may be restricted.

English

27 En