Yamaha NS-F700 White: инструкция

TG

NS-F700

Speaker

Enceinte

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

Thank you for selecting this YAMAHA product.

Information for Users on Collection and Disposal of Old Equipment

PRECAUTIONS

This symbol on the products, packaging, and/or

Read this before using the speaker.

accompanying documents means that used electrical and

• To assure the finest performance, please read this manual

electronic products should not be mixed with general

carefully. Keep it in a safe place for future reference.

household waste.

• Install the speaker in a cool, dry, clean place - away from

For proper treatment, recovery and recycling of old products,

windows, heat sources, sources of excessive vibration, dust,

please take them to applicable collection points, in

moisture and cold. Avoid sources of electrical noise

accordance with your national legislation and the Directives

(transformers, motors). To prevent fire or electrical shock, do

2002/96/EC.

not expose this unit to rain or water.

By disposing of these products correctly, you will help to save

• To prevent the enclosure from warping or discoloring, do not

valuable resources and prevent any potential negative effects

place the speaker where it will be exposed to direct sunlight or

on human health and the environment which could otherwise

excessive humidity.

arise from inappropriate waste handling.

• Do not place the following objects on the speaker:

For more information about collection and recycling of old

Glass, china, small metallic etc.

products, please contact your local municipality, your waste

If glass, etc., falls as a result of vibration and breaks, it may

disposal service or the point of sale where you purchased the

cause personal injury.

items.

A burning candle, etc.

[For business users in the European Union]

If the candle falls as a result of vibrations, it may cause fire

and personal injury.

If you wish to discard electrical and electronic equipment,

A vessel with water in it

please contact your dealer or supplier for further information.

If the vessel falls as a result of vibrations and water spills, it

[Information on Disposal in other Countries outside the

may cause damage to the speaker, and/or you may get an

European Union]

electric shock.

This symbol is only valid in the European Union. If you wish

• Do not place the speaker where foreign material such as

to discard these items, please contact your local authorities or

dripping water. It might cause fire, damage to this unit, and/or

dealer and ask for the correct method of disposal.

personal injury.

• Do not place the speaker where it is liable to be knocked over

or struck by falling objects. Stable placement will also ensure

PRECAUTIONS WHEN

better sound performance.

• Placing the speaker on the same shelf or rack as the turntable

POSITIONING THE SPEAKERS

can result in acoustical feedback.

• Never put a hand or a foreign object into the port located on the

The speaker is constructed with the majority of the weight located

rear of the speaker, as this might cause personal injury and/or

in its upper portion, and is thus susceptible to falling over if proper

damage to the speaker.

care is not taken to insure its stability. If the speaker falls over, it

• When moving the speaker, do not hold the port, as it might

may damage the speaker or be the cause of injury (or even death)

cause personal injury and/or damage to the speaker.

to person and/or damage to personal property.

• Any time you notice distortion, reduce the volume control on

your amplifier. Never allow your amplifier to be driven into

“clipping.” Otherwise the speaker may be damaged.

• When using an amplifier with a rated output power higher than

the nominal input power of the speaker, care should be taken

never to exceed the speaker’s maximum input.

• Do not attempt to clean the speaker with chemical solvents, as

this might damage the finish. Use a clean, dry cloth.

• Do not attempt to modify or repair the speaker. Contact

For safe and proper use of the speaker:

qualified YAMAHA service personnel when any service is

• Position the speaker in a location that is solid, level, smooth,

needed. The cabinet should never be opened for any reasons.

and low (with respect to the floor).

• Secure placement and installation is the owner’s

• Do not push or apply pressure to the side of the speaker when

responsibility. YAMAHA shall not be liable for any

moving, or lean objects against the side of the speaker.

accident caused by improper placement or installation of

• Do not sit on or set objects on top of the speaker.

speakers.

Vibrations or jolts associated with earthquakes and other phenomena or

activities may cause the speaker to fall over. For safety reasons, using

commercially available products that increase stability of the speaker is

recommended (metal fittings or chains, etc.).

Use the stands included with the speaker to increase stability:

Be sure to use the stands regardless of where the speaker is

positioned. Attaching the stands included with the speaker

reinforces the base of the speaker so as not to fall over.

Please be cautioned that even though the stands are connected, this

does not guarantee that the speaker will not fall over.

i En

■Procedure

SUPPLIED ACCESSORIES

1 Put the 6 mm (1/4”) screw through the large hole in the stand,

and screw it into the speaker at one of the outside holes in the

After unpacking, check that the following parts are contained.

base of the speaker.

At this time, screw it in loosely so that the stand can still be

moved.

2 Put the 4 mm (3/16”) wood screw through the other hole in the

stand, and screw it into the other hole in the base of the

speaker.

3 Tighten both of the screws firmly.

(L) Screw

(R)

(6mm (1/4”)) × 4

4 Attach a pad to the bottom of the end portion of the stand.

Stand (R × 2, L × 2)

5 Attach the other stands to the other corners of the base of the

speaker in the same way and confirm that all 4 stands have

been firmly attached.

Wood screw

Pad × 4

(4mm (3/16”)) × 4

Pad

ATTACHING THE STANDS

Screw (6mm (1/4”))

When placing the speakers, be sure to use the stands to increase

Wood screw (4mm (3/16”))

stability.

Notes

• Make sure to have another person support it.

• Pay extra attention to avoid scratching on the speaker’s

surface.

• Place the speaker on a supporting surface (height of 7 cm

(2-3/4”) or more). Use a blanket or a cushion on it to avoid

scratching.

• The provided stands are in two types. Two stands are for the

right side and others are for the left side. Attach each stand

to the proper position on the bottom of the speaker by

following the figure below.

• To attach the stands to the speaker, be sure to lay down the

speaker with the side facing up.

Note

(L)(R)

Be carefully not to apply force to the side of the speaker,

otherwise the speaker may fall causing damage to the speaker

or personal injury.

Back

Front

English

(L) (R)

View from the bottom of the speaker

Use the 8 specified holes located on the base of the speaker.

1 En