Indesit DISP 5377: Start-up and use

Start-up and use

Starting the dishwasher

Measuring out the detergent

EN

A good wash result also depends on the correct

1. Turn the water tap on.

2. Open the door and press the ON/OFF button: you will hear

amount of detergent being used; exceeding the stated

a short beep and the display and option indicator lights switch

amount does not result in a more effective wash and

on.

increases environmental pollution.

3. Measure out the detergent (see below).

 Only use detergent which has been

4. Load the racks (see Loading the racks).

specifically designed for dishwashers.

5. Select the wash cycle in accordance with the type of

crockery and its soil level (see Table of wash cycles),

by

DO NOT USE washing up liquid.

pressing the P button.

6. Select the wash options (see adjacent information).

Using excessive detergent may result in foam

7. Start the wash cycle by shutting the door: a long beep

residue remaining in the machine after the cycle

signals the start of the wash cycle.

has ended.

8. Two short beeps and one long one indicate the end of the

The use of tablets is only recommended for

wash cycle and the wash cycle number flashes on the display.

Open the door, switch off the appliance by pressing the ON/

models which offer the MULTI-FUNCTIONAL

OFF button, shut off the water tap and unplug the appliance

TABLETS option.

from the electricity socket.

To achieve the best results from each washing

9. Wait for a few minutes before removing the crockery, in

and drying cycle, powder detergent, rinse aid liquid

order to avoid burns. Unload the racks, beginning with the

and salt should be used.

lower level.

- The machine will switch off automatically

Compartment A: Washing detergent

during certain periods of inactivity, in order to

Compartment B: Pre-wash detergent

minimise electricity consumption.

D

1. Open cover C by pressing

A

B

button D.

If the crockery is only lightly soiled or if it has been rinsed

2. Pour in the detergent after

with water before being placed in the dishwasher, reduce the

consulting the Table of wash

amount of detergent used accordingly.

cycles:

 For powder detergent use

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection

compartments A and B.

process it is possible to change the cycle, provided that it has

C

 For detergent in tablet form:

only just begun: open the door, avoiding the escaping steam,

when the cycle requires 1 tablet, place it in compartment

and press and hold the ON/OFF button; the machine will

A and close the cover; when it requires 2, place the

switch off with a long beep. Switch the machine back on using

second tablet at the bottom of the appliance.

the ON/OFF button and select the new wash cycle and any

3. Remove detergent residues from the edges of the

options desired; start the cycle by closing the door.

compartment and close the cover until it clicks.

Adding extra crockery

Without switching off the machine, open the door, taking care

to avoid the escaping steam, and place the crockery inside

the dishwasher. Close the door: the cycle starts from the point

at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a

power cut, the cycle stops. It starts again from the point at

which it was interrupted once the door has been shut or once

the electricity supply is restored.

* Only available in selected models.

20

Wash options

Wash options

Multi-functional tablets*

EN

This option optimises washing and drying results.

If an option is not compatible with the selected was cycle

When using multi-functional tablets, press the MULTI-

(see Table of wash cycles), the corresponding LED flashes

FUNCTIONAL TABLETS button. The corresponding indicator

rapidly 3 times and 2 short beeps will sound.

light will illuminate. The Multi-functional tablets option results

in the lengthening of the wash cycle.

Delayed start

It is possible to delay the start time of the cycle by 3, 6 or 9

The MULTI-FUNCTIONAL TABLETS option remains set

hours.

for subsequent wash cycles if it is not deselected.

1. Press the DELAYED START button: every time it is pressed a

buzzer sounds and the selected period of time is displayed.

The use of tablets is only recommended for models

2. Select the wash cycle and shut the door: after the beep

which offer the MULTI-FUNCTIONAL TABLETS option.

sounds, the timer begins counting down.

3. Once this time has elapsed, the indicator light switches off

This option is not recommended for use with wash

and the wash cycle begins.

cycles which do not specify the use of multi-functional

To adjust the delay time and select a smaller period of time,

tablets (see Table of options).

press the DELAYED START button. To cancel it, press the

button repeatedly until the selected delayed start indicator light

switches off. The wash cycle will start automatically as soon as

the door is shut.

A B C

Half load using the upper or lower rack*

Table of options

Delayed

Half

Tabs

If there are not many dishes to be washed, a half load cycle

Start

Load

may be used in order to save water, electricity and detergent.

1. Intensive

Yes

Yes

Yes

Select the wash cycle and press the HALF LOAD button

repeatedly: the triangle corresponding to the selected load will

2. Normal

Yes

Yes

Yes

illuminate and the wash cycle will take place only using the

upper or the lower rack.

3. Daily

Yes

Yes

Yes

The Half load option is not compatible with the Rapid ,

4. Soak

Yes

Yes

No

cycle.

5. Eco

Yes

Yes

Yes

Remember to load the upper or lower rack only, and to

reduce the amount of detergent accordingly.

6. Rapid

Yes

No

Yes

7. Delicates

Yes

Yes

Yes

* Only available in selected models.

21