Pioneer VSX-520-S: Setting What it does Option(s)

Listening to your system 05

37

En

VSX-520_SYXCN_En.book 37 ページ ２０１０年４月１２日　月曜日　午後７時１３分

Setting What it does Option(s)

HDMI

Specifies the routing of the HDMI audio signal out of this

AMP

(HDMI Audio)

receiver (amp) or through to a TV. When THRU is selected,

THRU

no sound is output from this receiver.

A.DLY

This feature automatically corrects the audio-to-video delay

OFF

(Auto Delay)

between components connected with an HDMI cable. The

ON

audio delay time is set depending on the operational status

of the display connected with an HDMI cable. The video

delay time is automatically adjusted according to the audio

f

delay time.

g

Spreads the center channel between the front right and left

0 to 7

C.WIDTH

speakers, making it sound wider (higher settings) or

Default: 3

(Center Width)

narrower (lower settings).

(Applicable only when

using a center speaker)

g

Adjusts the surround sound balance from front to back,

–3 to +3

DIMEN.

making the sound more distant (minus settings), or more

(Dimension)

Default: 0

forward (positive settings).

g

Extends the front stereo image to include surround

OFF

PNRM.

speakers for a ‘wraparound’ effect.

(Panorama)

ON

h

Adjust the center image to create a wider stereo effect with

0 to 10

C.IMG

(Center image)

vocals. Adjust the effect from 0 (all center channel sent to

Default: 3

(Applicable only when

front right and left speakers) to 10 (center channel sent to

(NEO:6 MUSIC),

using a center speaker)

the center speaker only).

10 (NEO:6 CINEMA)

H.GAIN

Adjusts the output from the front height speaker when

L (Low)

(Height Gain)

listening in DOLBY PLIIz HEIGHT mode. If set to H, the

M (Mid)

sound from the top will be more emphasized.

H (High)

a. You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button.

b. You can change the Sound Retriever feature at any time by using S.RETRIEVER button.

c. This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.

d. The initial set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than

Dolby TrueHD.

e. You shouldn’t have any problems using this with most SACD discs, but if the sound distorts, it is best to

switch the gain setting back to 0 dB.

f. This feature is only available when the connected display supports the automatic audio/video synchronizing

capability (‘lip-sync’) for HDMI. If you find the automatically set delay time unsuitable, set A.DLY to OFF and

adjust the delay time manually. For more details about the lip-sync feature of your display, contact the

manufacturer directly.

g. Only available with 2-channel sources in DOLBY PLII MUSIC mode.

h. Only when listening to 2-channel sources in NEO:6 CINEMA and NEO:6 MUSIC mode.