Yamaha RX-V663 Black: Using Bluetooth™ components

USING BLUETOOTH™ COMPONENTS

Using Bluetooth™ components

You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and

enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between

this unit and the Bluetooth component. You need to perform “pairing” the connected Bluetooth adapter and your

Bluetooth component in advance.

Pairing the Bluetooth™ adapter

Note

and your Bluetooth™ component

If the Bluetooth adapter is not connected to the DOCK

terminal of this unit, “No BT adapter” appears in the front

Pairing must be performed when using a Bluetooth

panel display.

component with the Bluetooth adapter connected to this

unit for the first time or if the pairing data has been

4 Check that the Bluetooth component detects

deleted. “Pairing” refers to the operation of registering a

the Bluetooth adapter.

Bluetooth component for Bluetooth communications.

If the Bluetooth component detects the Bluetooth

y

adapter, “YBA-10 YAMAHA” (example) appears in

• You only need the pairing operation for the first time that you

the Bluetooth device list.

use the Bluetooth component with the Bluetooth adapter.

• Pairing requires operations on this unit and on the other

5 Select the Bluetooth adapter in the Bluetooth

component with which Bluetooth communications are to be

established. If necessary, refer to the other component’s

device list and then enter the pass key

operating instructions.

“0000” on the Bluetooth component.

When the pairing procedure is successful,

There are two pairing methods: pairing by using “START

“Completed” appears in the front panel display.

PAIRING” in “SET MENU” and quick pairing.

Note

■ Pairing by using “SET MENU”

The Yamaha Bluetooth adapter can be paired with up to eight

Use this feature to perform pairing with the video monitor.

Bluetooth components. When pairing is conducted successfully

Select “START PAIRING” in “INPUT MENU”. See

with a ninth component and the pairing data is registered, the

page 86 for details.

pairing data for the least recently used other component is

cleared.

■ Quick pairing

To ensure security, a time limit of 8 minutes is set for the

pairing operation. You are recommended to read and fully

Playback of the Bluetooth™

understand all the instructions before starting.

component

1 Rotate the

R

INPUT selector (or set the

1 Rotate the

R

INPUT selector (or set the

operation mode selector to

F

SOURCE and

operation mode selector to

F

SOURCE and

then press

5

V-AUX/DOCK) to select

then press

5

V-AUX/DOCK) to select

“V-AUX” as the input source.

“V-AUX” as the input source.

2 Turn on the Bluetooth component you want

2 Start playback of your Bluetooth component.

to pair with.

When the connected Bluetooth adapter detects the

Bluetooth component, “BT connected” and the

3 Press and hold

C

BAND (or

8

BAND) for 3

DOCK indicator appears in the front panel display.

seconds to start pairing.

y

Once the Bluetooth adapter starts pairing,

• When you press

9

ENTER on the remote control, the

“Searching...” appears for a moment. While the

connected Bluetooth adapter searches and connect to the last

Bluetooth adapter is in the pairing mode, DOCK

connected Bluetooth component. If the Bluetooth adapter

indicator flashes in the front panel display.

cannot find the Bluetooth component, “Not found” appears in

the front panel display.

y

• To disconnect the Bluetooth adapter from the Bluetooth

To cancel the pairing, press

C

BAND (or

8

BAND) again.

component, press

0

RETURN.

62 En