Pioneer VSX-920-K: The Input Setup menu

Basic Setup04

The settings made in the Auto MCACC Setup

2 Press on the remote control,

should give you excellent surround sound from

then press

HOME MENU

.

your system, but it is also possible to adjust

A Graphical User Interface (GUI) screen

these settings manually using The Advanced

appears on your TV.

Use /// and

MCACC menu on page 86 or The System Setup

ENTER to navigate through the screens and

1

and Other Setup menus on page 100.

select menu items. Press RETURN to confirm

and exit the current menu.

Problems when using the Auto

3Select ‘

System Setup

’ from the

Home

MCACC Setup

Menu

.

If the room environment is not optimal for the

Auto MCACC Setup (too much background

4Select ‘

Input Setup

’ from the

System

noise, echo off the walls, obstacles blocking

Setup

menu.

the speakers from the microphone) the final

settings may be incorrect. Check for household

appliances (air conditioner, fridge, fan, etc.),

that may be affecting the environment and

switch them off if necessary. If there are any

instructions showing in the front panel display,

please follow them.

• Some older TVs may interfere with the

operation of the microphone. If this seems

to be happening, switch off the TV when

doing the Auto MCACC Setup.

5 Select the input function that you want to

set up.

The Input Setup menu

The default names correspond with the names

You only need to make settings in the Input

next to the terminals on the rear panel (such as

Setup menu if you didn’t hook up your digital

DVD) which, in turn, correspond with the

equipment according to the default settings

names on the remote control.

(see Input function default and possible

settings on page 43). In this case, you need to

6 Select the input(s) to which you’ve

tell the receiver what equipment is hooked up

connected your component.

to which terminal so the buttons on the remote

For example, if your DVD player only has an

control correspond to the components you’ve

optical output, you will need to change the

connected.

DVD input function’s Digital In setting from

COAX-1 (default) to the optical input you’ve

1 Switch on the receiver and your TV.

connected it to.The numbering (OPT-1 to 2)

Use  RECEIVER to switch on.

corresponds with the numbers beside the

inputs on the back of the receiver.

42

En

1 • Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm will

end up with different size settings. You can correct the setting manually using the Manual speaker setup on page 100.

• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting

should be accurate (taking delay and room characteristics into account) and generally does not need to be changed.

• If Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and viewing

environment, we recommend adjusting the settings manually.

VSX-1020_SYXCN.book 42 ページ ２０１０年３月１２日　金曜日　午前９時１０分

4b.Input Setup

A/V RECEIVER

Input : DVD

Input Name : Rename

Input Skip : OFF

Digital In : COAX-1

HDMI Input :

---

Component In : Comp-1

Exit Finish