Pioneer VSX-920-K: The Advanced MCACC menu 10 Fine Speaker Distance Fine Channel Level

VSX-1020_SYXCN.book 91 ページ ２０１０年３月１２日　金曜日　午前９時１０分

The Advanced MCACC menu 10

1 Select ‘

Manual MCACC

’ from the

1 Select ‘

Fine Channel Level

’ from the

English

Advanced MCACC

menu.

Manual MCACC

setup menu.

See Making receiver settings from the Advanced

The volume increases to the 0.0 dB reference

MCACC menu on page 86 if you’re not already

level.

at this screen.

2 Adjust the level of the left channel.

2 Select the setting you want to adjust.

This will be the reference speaker level, so you

Deutsch

If you’re doing this for the first time, you might

may want to keep the level around 0.0 dB so

want to make these settings in order.

that you’ll have plenty of room to adjust the

other speaker levels.

• Fine Channel Level – Make fine

adjustments to the overall balance of your

• After pressing ENTER, test tones will be

speaker system (see Fine Channel Level

output.

Français

below).

3 Select each channel in turn and adjust

• Fine SP Distance – Make precise delay

the levels (

+/–12.0 dB

) as necessary.

settings for your speaker system (see Fine

Use / to adjust the volume of the speaker

Speaker Distance below).

you selected to match the reference speaker.

• Standing Wave – Control overly resonant

When it sounds like both tones are the same

Italiano

low frequencies in your listening room (see

volume, press  to confirm and continue to

Standing Wave on page 92).

the next channel.

The last two settings are specifically for

• For comparison purposes, the reference

customizing the parameters explained in

speaker will change depending on which

Acoustic Calibration EQ Adjust on page 93:

speaker you select.

Nederlands

• EQ Adjust – Manually adjust the frequency

• If you want to go back and adjust a

balance of your speaker system while

channel, simply use / to select it.

listening to test tones (see Acoustic

4 When you’re finished, press

RETURN

.

Calibration EQ Adjust on page 93).

You will return to the Manual MCACC setup

• EQ Professional – Calibrate your system

menu.

based on the direct sound coming from the

Español

speakers and make detailed settings

Fine Speaker Distance

according to your room’s reverb

•Default setting: 3.00m (all speakers)

characteristics (see Acoustic Calibration

For proper sound depth and separation with

EQ Professional on page 93).

your system, it is necessary to add a slight bit

of delay to some speakers so that all sounds

Fine Channel Level

will arrive at the listening position at the same

•Default setting: 0.0dB (all channels)

time. You can adjust the distance of each

You can achieve better surround sound by

speaker in 1 cm increments. The following

properly adjusting the overall balance of your

setting can help you make detailed

speaker system. You can adjust the Channel

adjustments that you may not achieve using

Level of each speaker in 0.5 dB increments. The

the Manual speaker setup on page 100.

following setting can help you make detailed

1 Select ‘

Fine SP Distance

’ from the

adjustments that you may not achieve using

Manual MCACC

setup menu.

the Manual speaker setup on page 100.

2 Adjust the distance of the left channel

from the listening position.

91

En