Pioneer VSX-920-K: Manual MCACC setup

The Advanced MCACC menu10

You can also choose to view the settings by

selecting individual parameters from the

Manual MCACC setup

MCACC Data Check screen:

You can use the settings in the Manual

• Speaker Setting – The size and number of

MCACC setup menu to make detailed

speakers you’ve connected (see page 102

adjustments when you’re more familiar with

for more on this)

the system. Before making these settings, you

should have already completed Automatically

• Channel Level – The overall balance of

your speaker system (see page 91 or 103

conducting optimum sound tuning (Auto

for more on this)

MCACC) on page 39.

• Speaker Distance – The distance of your

You only need to make these settings once

speakers from the listening position (see

(unless you change the placement of your

1

page 91 or 103 for more on this)

current speaker system or add new speakers).

• Standing Wave – Filter settings to control

lower ‘boomy’ frequencies (see page 92 for

CAUTION

more on this)

• The test tones used in the Manual MCACC

• Acoustic Cal EQ – Adjustments to the

setup are output at high volume.

frequency balance of your speaker system

based on the acoustic characteristics of

your room (see page 93 for more on this)

Important

• Output MCACC data – MCACC data and

• Press the MCACC button while the

parameters can be transferred from this

pertinent setup screens are displayed to

receiver to a USB device and the data

select MCACC presets.

imported into other devices using a special

• For some of the settings below, you’ll have

application via a computer (see Output

to connect the setup microphone to the

MCACC data on page 97 for more on this).

front panel and place it about ear level at

Press

RETURN

after you have finished checking

your normal listening position. Press

each screen. When you’re finished, select

HOME MENU to display the Home Menu

RETURN

to go back to the

Home Menu

.

before you connect the microphone to this

Be sure to disconnect the microphone from

receiver. If the microphone is connected

this receiver upon completion of the Auto

while the HOME MENU is not being

MCACC Setup.

displayed, the display will change to the

Full Auto MCACC under Advanced

MCACC.

• See Problems when using the Auto MCACC

Setup on page 42 for notes regarding high

background noise levels and other possible

interference.

• If you’re using a subwoofer, switch it on

and turn up the volume to the middle

position.

90

En

VSX-1020_SYXCN.book 90 ページ ２０１０年３月１２日　金曜日　午前９時１０分

1 Since the distance measurements have been set according to the sound characteristics of your speakers, there are

cases where (for optimal surround sound) the actual distance may differ from the speaker distance setting.