Pioneer VSX-920-K: Making an audio or a video recording MULTI-ZONE remote controls Button What it does

Using other functions08

4 When

Speaker System

is set to

ZONE 2

,

use the

MASTER VOLUME

dial to adjust the

Making an audio or a video

1

volume for the sub zone.

recording

5 When you’re finished, press

MULTI-ZONE

You can make an audio or a video recording

CONTROL

again to return to the main zone

from the built-in tuner, or from an audio or

controls.

video source connected to the receiver (such

3

You can also press MULTI-ZONE ON/OFF on

as a CD player or TV).

the front panel to switch off all output to the

Keep in mind you can’t make a digital

2

sub zone.

recording from an analog source or vice-versa,

so make sure the components you are

MULTI-ZONE remote controls

recording to/from are hooked up in the same

way (see Connecting your equipment on

Set the MULTI-ZONE operation switch to

ZONE 2

page 15 for more on connections).

to operate the corresponding zone.

Since the video converter is not available when

The following table shows the possible MULTI-

making recordings (from the video OUT jacks)

ZONE remote controls:

make sure to use the same type of video cable

for connecting your recorder as you used to

connect your video source (the one you want to

record) to this receiver. For example, you must

connect your recorder using Component video

if your source has also been connected using

Component video.

For more information about video connections,

see Connecting a HDD/DVD recorder, VCR and

other video sources on page 29.

1 Select the source you want to record.

Use the input function buttons (or INPUT

SELECT).

2 Prepare the source you want to record.

Tune to the radio station, load the CD, video,

DVD etc.

3 Prepare the recorder.

Insert a blank tape, MD, video etc. into the

recording device and set the recording levels.

74

En

VSX-1020_SYXCN.book 74 ページ ２０１０年３月１２日　金曜日　午前９時１０分

Button What it does



Switches on/off power in the sub zone.

INPUT

Use to select the input function in

SELECT

the sub zone.

Input

Use to select the input function

function

directly (this may not work for some

buttons

functions) in the sub zone.

MASTER

Use to set the listening volume in the

a

VOLUME

sub zone.

+/–

MUTE

Mutes the sound or restores the

sound if it has been muted (adjusting

a

the volume also restores the sound).

a.You can only use this button when Speaker System

is set to ZONE 2.

1 The volume levels of the main and sub zone are independent.

2 • You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.

• If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so

that this receiver is in standby.

3 • The receiver’s volume, Audio parameters (the tone controls, for example), and surround effects have no effect on

the recorded signal.

• Some digital sources are copy-protected, and can only be recorded in analog.

• Some video sources are copy-protected. These cannot be recorded.