Pioneer VSX-920-K: Resetting the input assignment Direct function of one of the input function buttons

VSX-1020_SYXCN.book 80 ページ ２０１０年３月１２日　金曜日　午前９時１０分

Controlling the rest of your system09

Resetting the input assignment

Direct function

•Default setting: On

of one of the input function

You can use the direct function feature to

buttons

control one component using the remote

This procedure resets the input assignment

control while at the same time using your

preset at the remote control’s input function

receiver to play a different component. This

button, restoring the default.

could let you, for example, use the remote

control to set up and listen to a CD on the

1 Press and hold

R.SETUP

, then press “9”

receiver, and then use the remote control to

for three seconds.

rewind a tape in your VCR while you continue

The LED flashes continuously.

to listen to your CD player.

• To cancel the preset setup mode press

When direct function is on, any component you

R.SETUP.

select (using the input function buttons) will be

2 Press and hold the input function button

selected by both the receiver and the remote

corresponding to the command to be erased

control. When you turn direct function off, you

for three seconds.

can operate the remote control without

If the LED lights for one second, the erasing

affecting the receiver.

has been successfully completed.

1 Press and hold

R.SETUP

, then press “5”

for three seconds.

The LED flashes continuously.

• To cancel the preset setup mode press

R.SETUP.

2 Press the input function button for the

component you want to control.

3 Press “1” (On) or “0” (Off) to switch the

direct function mode.

If the LED lights for one second, the setting has

been successfully completed.

If the LED flashes three times, the setting has

failed.

4 Press

R.SETUP

to exit the setup.

80

En