Pioneer DEH-X6500DAB: System menu Selecting the key color

Section

02

Operating this unit

Operating this unit

SUB.W (subwoofer on/off setting)

SLA (source level adjustment)

LANGUAGE (multi-language)

Activate this setting when using an auxiliary de-

vice connected to this unit.

This unit is equipped with a subwoofer output

SLA (Source level adjustment) lets you adjust the

This unit can display the text information from a

1 Press M.C. to turn AUX on or off.

which can be turned on or off.

volume level of each source to prevent radical

compressed audio file even for information em-

1 Press M.C. to select the desired setting.

changes in volume when switching between sour-

bedded in English or Russian.

MUTE MODE (mute mode)

NOR (normal phase)—REV (reverse phase)—

ces.

! If the embedded language and the selected

Sound from this system is automatically muted or

OFF (subwoofer off)

! Settings are based on the FM volume level,

language setting are not the same, text infor-

attenuated when a signal from equipment with a

which remains unchanged.

mation may not display properly.

SUB.W CTRL (subwoofer adjustment)

mute function is received.

! The MW/LW volume level can also be adjusted

! Some characters may not be displayed prop-

1 Press M.C. to display the setting mode.

Only frequencies lower than those in the selected

with this function.

erly.

2 Turn M.C. to select the desired setting.

range are outputted from the subwoofer.

! When selecting FM as the source, you cannot

1 Turn M.C. to select the desired setting.

You can select any one of the options in the fol-

1 Press M.C. to display the setting mode.

switch to SLA.

ENG (English)—РУС (Russian)

lowing list:

2 Press M.C. to cycle between the following:

! USB and iPod are all set to the same setting

CLOCK SET (setting the clock)

! MUTE – Muting

Cut-off frequency—Output level—Slope level

automatically.

! 20dB ATT – Attenuation (20dB ATT has a

Rates that can be adjusted will flash.

1 Press M.C. to display the setting mode.

1 Press M.C. to display the setting mode.

stronger effect than 10dB ATT)

3 Turn M.C. to select the desired setting.

2 Turn M.C. to adjust the source volume.

2 Press M.C. to select the segment of the clock

! 10dB ATT – Attenuation

Cut-off frequency: 50HZ—63HZ—80HZ—

Adjustment range: +4 to –4

display you wish to set.

100HZ—125HZ—160HZ—200HZ

PW SAVE (power saving)

Hour—Minute

Output level: –24 to +6

3 Turn M.C. to adjust the clock.

Switching this function on enables you to reduce

Slope level: –6 — –12

System menu

the consumption of battery power.

12H/24H (time notation)

BASS BOOST (bass boost)

! Turning on the source is the only operation al-

Important

lowed when this function is on.

PW SAVE (power saving) is canceled if the ve-

1 Press M.C. to select the desired setting.

1 Press M.C. to display the setting mode.

1 Press M.C. to turn the power save on or off.

hicle battery is disconnected and will need to be

12H (12-hour clock)—24H (24-hour clock)

2 Turn M.C. to select a desired level.

turned back on once the battery is reconnected.

0 to +6 is displayed as the level is increased or

INFO DISPLAY (sub information)

When PW SAVE (power saving) is off, depend-

decreased.

ing on connection methods, the unit may con-

The type of text information displayed in the sub

Selecting the key color

HPF SETTING (high pass filter adjustment)

tinue to draw power from the battery if your

information section can be toggled.

You can select desired colors for the keys of this

vehicle’s ignition doesn’t have an ACC (acces-

1 Press M.C. to display the setting mode.

When you do not want low sounds from the sub-

unit.

sory) position.

2 Turn M.C. to select the desired setting.

woofer output frequency range to play from the

SPEANA—LEVEL METER—SOURCE—CLOCK

front or rear speakers, turn on the HPF (high pass

1 Press M.C. to display the main menu.

1 Press M.C. to display the main menu.

—OFF

filter). Only frequencies higher than those in the

! The signal bar indicator displays for SPEANA

selected range are output from the front or rear

2 Turn M.C. to display ILLUMI and press to

2 Turn M.C. to change the menu option

or LEVEL METER when the source is set to

speakers.

select.

and press to select SYSTEM.

DAB or TUNER.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the following:

AUTO PI (auto PI seek)

3 Turn M.C. to display KEY COLOUR and

3 Turn M.C. to select the system menu

Cut-off frequency—Slope level

press to select.

function.

The unit can automatically search for a different

3 Turn M.C. to select the desired setting.

Once selected, the following system menu func-

station with the same programming, even during

Cut-off frequency: OFF—50HZ—63HZ—80HZ

4 Turn M.C. to select the illumination color.

tions can be adjusted.

preset recall.

—100HZ—125HZ—160HZ—200HZ

You can select any one of the options in the fol-

1 Press M.C. to turn Auto PI seek on or off.

Slope level: –6 — –12

lowing list:

AUX (auxiliary input)

! Preset colors (ranging from WHITE to ROSE)

! SCAN (cycle through all colors)

10

En