Pioneer XC-HM70-K: Speaker connection Using other subwoofer Connecting a TV, etc.

Connecting your equipment

English Français Español Italiano

Speaker connection

• The provided speaker wire with the red tube is for the plus

(+) terminal. Connect the wire with red tube to the plus

(+) terminal, and other wire to the minus (

–) terminal.

• Use speakers with an impedance of 4 ohms as lower

impedance speakers can damage the unit.

Deutsch

Nederlands

9

En

• Do not stand or sit on the speakers. You may be injured.

Using other subwoofer

You can connect a subwoofer with an amplifier to the

SUBWOOFER PREOUT socket.

• These speaker terminals carry HAZARDOUS LIVE

voltage. To prevent the risk of electric shock when

connecting or disconnecting the speaker cables,

disconnect the power cord before touching any

uninsulated parts.

• Do not mistake the right and the left channels. The right

speaker is the one on the right side when you face the

unit.

• Do not let the bare speaker wires touch each other.

• Make sure that all the bare speaker wire is twisted

together and inserted fully into the speaker terminal. If

any of the bare speaker wire touches the back panel, it

may cause the power to cut off as a safety measure.

If not using the provided speaker wire

Bare wire connections

1 Twist exposed wire strands together.

2 Loosen terminal and insert exposed wire.

3 Tighten terminal.

X-HM70 only:

• Do not install your speakers overhead on the ceiling or

wall. The grill is designed to be detachable, and as such it

may fall and cause damage or personal injury if installed

overhead.

• Do not allow any objects to fall into or to be placed in the

bass reflex ducts.

Connecting a TV, etc.

Connect to the TV using an audio cable.

• No sound is heard from the subwoofer without a built-in

amplifier.

12 3

To select Line In function:

• On main unit: Press INPUT button repeatedly until Line In

is displayed.

• On remote control: Press LINE button.

X-HM70_En.fm 9 ページ ２０１１年８月２日　火曜日　午後４時４６分