Beurer HTE 50: 8 Technical specifications

8 Technical specifications: Beurer HTE 50

background image

24 

Cleaning the straightening/crimping iron 

[F/G] 

•  Slide the selector switch [11] into the 

"Straighten" position [a]. 

•  Press on the lever [3] to open the 

straightening/crimping attachment [12]. 

•  Use the fingers on your other hand to slide 

the selector switch [11] into the "Crimp" 

position [c]. Now the straightening/crimping 

iron [F, G] is unlocked. 

•  Remove the straightening/crimping iron 

[F, G] from the straightening/crimping 

attachment [12]. 

•  Now the straightening/crimping iron [F, G] 

can be cleaned, like the other attachments. 

•  Attach the straightening/crimping iron [F, G] 

again after cleaning it. Attach it by following 

the removal steps in reverse order. 

8 Technical  specifications 

Weight 

Approx. 330 g 

Power supply 

220 - 240 V ~, 50 Hz 

Power consumption 

25 W 

Temperature range 

125 to 160 °C 

Safety class 

II 

Ambient conditions 

Only approved for indoor use 

Allowable temperature range 

-10 to +40 °C 

Subject to technical modifications. 

9 Disposal 

In the interest of protecting the environment, 

the unit must not be thrown out with the 

household waste at the end of its service life.  

Dispose of the unit at a suitable local 

collection or recycling point. 

Observe the local regulations for 

material disposal. 

Dispose of the unit in accordance with 

EC Directive 2002/96/EC–WEEE (Waste 

Electrical and Electronic Equipment). 

If you have any questions, please contact the 

local authorities responsible for waste 

disposal. 

You can find out about collection points for 

your old units e.g. from the local municipal 

government, the local waste disposal 

company or your dealer.

Оглавление