Pioneer X-HM70-S: Additional Information

X-HM70_En.fm 28 ページ ２０１１年８月２日　火曜日　午後４時４６分

Additional Information

Cannot access the component connected to the network.

The NETWORK function cannot be operated with the

 The wireless LAN converter is properly connected to the

 The component connected to the network is not properly set. If

buttons on the remote control.

receiver and the wireless LAN converter’s indicators are lit,

the client is automatically authorized, you need to enter the

 The remote control is not currently set to the NETWORK

but the wireless LAN converter cannot be set from the receiver

corresponding information again. Check whether the

mode. Press NETWORK to set the remote control to the

(the settings screen cannot be displayed).

connection status is set to “Do not authorize”.

NETWORK mode (page 20).

If Network Modes in the receiver’s Network Settings is set

 There are no playable audio files on the component connected

to STATIC and the IP address has been set manually, the IP

to the network. Check the audio files stored on the component

address set in the wireless LAN converter may not match. In

Troubleshooting of wireless LAN

connected to the network.

the receiver’s Network Settings, set Network Modes to

Network cannot be accessed via wireless LAN.

Audio playback is undesirably stopped or disturbed.

DHCP. After the setting is completed, turn the receiver’s

 Wireless LAN converter’s power is not on (Wireless LAN

power off. Next, turn the receiver’s power back on and check

 The audio file currently being played back was not recorded in

converter’s “Power”, “WPS” and “Wireless” indicators are not

whether the wireless LAN converter’s settings can be

a format playable on this receiver.

all lit). Check that the USB cable connecting the wireless LAN

displayed with the receiver.

-

Check whether the audio file was recorded in a format

converter to the receiver’s DC OUTPUT for WIRELESS LAN

If the settings can be displayed, change the IP address

supported by this receiver.

terminal is properly connected.

settings of the receiver and wireless LAN converter as

-

Check whether the folder has been damaged or corrupted.

 The LAN cable is not firmly connected. Firmly connect the

necessary.

-

Note that there are cases where even the audio files listed as

playable on this receiver cannot be played back or displayed

LAN cable (page 10).

 The IP address settings of the receiver and wireless LAN

(page 22).

 Wireless LAN converter and base unit (wireless LAN router,

converter do not match the settings of the wireless LAN

router, etc.

 The LAN cable is currently disconnected. Connect the LAN

etc.) are too far apart or there is an obstacle between them.

cable properly (page 10).

Improve the wireless LAN environment by moving the wireless

Check the IP address settings of the receiver and wireless

LAN converter and base unit closer together, etc.

LAN converter (including the Network Modes).

 There is heavy traffic on the network with the Internet being

 There is a microwave oven or other device generating

If the receiver’s Network Modes is DHCP, turn the receiver’s

accessed on the same network. Use 100BASE-TX to access

electromagnetic waves near the wireless LAN environment.

power off, then turn the power back on.

the components on the network.

-

Use the system in a place away from microwave ovens or

Check that the IP addresses of the receiver and wireless LAN

Cannot access Windows Media Player 11 or Windows Media

others device generating electromagnetic waves.

converter match the settings of the wireless LAN router, etc.

Player 12.

-

Avoid using devices generating electromagnetic waves as

If the receiver’s Network Modes is STATIC, set an IP address

 In case of Windows Media Player 11: You are currently logged

much as possible when using the system with the wireless

matching the network of the base unit (wireless LAN router,

onto the domain through your PC with Windows XP or

LAN.

etc.).

Windows Vista installed. Instead of logging onto the domain,

 Multiple wireless LAN converters are connected to the

For example, if the wireless LAN router’s IP address is

log onto the local machine (page 20).

wireless LAN router. When connecting multiple wireless LAN

“192.168.1.1”, set the receiver’s IP address to “192.168.1.XXX”

 In case of Windows Media Player 12: You are currently logged

converters, their IP addresses must be changed. For example,

(*1), the subnet mask to “255.255.255.0”, the gateway and

onto the domain through your PC with Windows 7 installed.

if the wireless LAN router’s IP address is “192.168.1.1”, set the

DNS to “192.168.1.1”.

Instead of logging onto the domain, log onto the local

first wireless LAN converter’s IP address to “192.168.1.249”,

Next, set the wireless LAN converter’s IP address to

machine (page 20).

the second wireless LAN converter’s IP address to

“192.168.1.249” (*2).

Cannot listen to Internet radio stations.

“192.168.1.248”, using values between 2 and 249 (such as

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2

 The firewall settings for components on the network are

“249” and “248”) that are not assigned to other wireless LAN

and 248 that is not assigned to other devices.

currently in operation. Check the firewall settings for

converters or to other devices.

(*2) Set the “249” in “192.168.1.249” to a number between 2

components on the network.

 Wireless LAN connections cannot be established between the

and 249 that is not assigned to other devices.

 You are currently disconnected from the Internet. Check the

wireless LAN converter and base unit (wireless LAN router,

 Try making the wireless LAN converter’s advanced settings.

connection settings for components on the network, and

etc.).

The wireless LAN converter can be connected to a computer

consult with your network service provider if necessary

-

With the wireless LAN converter connected to the receiver,

to make the advanced wireless LAN settings. For details, see

(page 21).

turn the receiver’s power off, unplug the power cord from the

the CD-ROM included for the wireless LAN converter. Check

 The broadcasts from an Internet radio station are stopped or

power outlet, then plug the power cord back in and turn the

the settings of the wireless LAN router, etc., then change the

interrupted. There are cases where you cannot listen to some

receiver’s power on.

settings of the wireless LAN converter.

Internet radio stations even when they are listed in the list of

-

The wireless LAN converter must be set in order to establish

Note, however, that making the advanced wireless LAN

Internet radio stations on this receiver (page 20).

wireless LAN connections. For details, refer to the operating

settings will not necessarily improve the wireless LAN

instructions of the wireless LAN converter.

environment. Be careful when changing the settings.

 The access point is set to conceal the SSID. In this case, the

SSID may not be displayed on the access point list screen. If

28

En