Pioneer VSX-520-K: Speaker setting

The System Setup menu06

Speaker setting

• Surround (S) – Select LARGE if your

surround speakers reproduce bass

Use this setting to specify your speaker

frequencies effectively. Select SMALL to

configuration (size, number of speakers). It is a

send bass frequencies to the other

good idea to make sure that the settings made

speakers or subwoofer. If you didn’t

in Automatically setting up for surround sound

connect surround speakers choose NO

(MCACC) on page 27 are correct.

(the sound of the surround channels is

1 Select ‘SP SET’ from the SP SETUP menu.

sent to the other speakers).

3

2Use

/

to choose the speaker(s) that

• Surround Back (SB)

– Select the number

you want to set then select a speaker size.

of surround back speakers you have (one,

4

Use / to select the size (and number) of

two or none).

Select LARGE if your

each of the following speakers:

surround back speakers reproduce bass

frequencies effectively. Select SMALL to

• Front (F) – Select LARGE if your front

send bass frequencies to the other

speakers reproduce bass frequencies

speakers or subwoofer. If you didn’t

effectively, or if you didn’t connect a

connect surround back speakers choose

subwoofer. Select SMALL to send the bass

NO.

1

frequencies to the subwoofer.

• Subwoofer (SW) – LFE signals and bass

• Center (C) – Select LARGE if your center

frequencies of channels set to SMALL are

speaker reproduces bass frequencies

output from the subwoofer when YES is

effectively, or select SMALL to send bass

5

selected.

Choose the PLUS setting if you

frequencies to the other speakers or

want the subwoofer to output bass sound

subwoofer. If you didn’t connect a center

continuously or you want deeper bass (the

speaker, choose NO (the center channel is

bass frequencies that would normally

sent to the other speakers).

come out the front and center speakers are

2

• Front Height (FH)

– Select LARGE if your

also routed to the subwoofer). If you did not

front height speakers reproduce bass

connect a subwoofer choose NO (the bass

frequencies effectively. Select SMALL to

frequencies are output from other

send bass frequencies to the other

speakers).

speakers or subwoofer. If you didn’t

connect front height speakers choose NO.

40

En

VSX-520_SYXCN_En.book 40 ページ ２０１０年４月１２日　月曜日　午後７時１３分

1 If you select SMALL for the front speakers, the subwoofer will automatically be fixed to YES. Also, the center, surround,

surround back and front height speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass

frequencies are sent to the subwoofer.

2 • You can only adjust this setting when PRE OUT is set to HEIGHT.

• If the surround speakers are set to NO, the front height speakers will automatically be set to NO.

3 You can only adjust the this setting when PRE OUT is set to SURR.BACK.

4 • If the surround speakers are set to NO, the surround back speakers will automatically be set to NO.

• If you select one surround back speaker only, make sure that additional amplifier is hooked up to the PRE OUT L (Single)

terminal.

5 If you can’t get good bass results, listen to the bass response with the subwoofer set to PLUS and YES or the front speakers

set to LARGE and SMALL alternatively and let your ears judge which sounds best. If you’re having problems, the easiest option

is to route all the bass sounds to the subwoofer by selecting SMALL for the front speakers.