Pioneer VSX-520-K: Basic Setup04
Basic Setup04: Pioneer VSX-520-K
Table of contents
- IMPORTANT IMPORTANT: THE MOULDED PLUG
- Information for users on collection and disposal of old equipment and used batteries Operating Environment
- Contents
- 08 Making recordings
- Flow of settings on the receiver
- Chapter 1: Before you start Checking what’s in the box Installing the receiver Loading the batteries
- Ventilation
- Chapter 2: Controls and displays Front panel
- Operating range of remote control
- Display
- Controls and displays02
- Remote control
- Controls and displays02
- Controls and displays 02
- Chapter 3: Connecting your equipment Placing the speakers
- Hints on the speaker placement
- Connecting the speakers
- Making cable connections
- HDMI cables About HDMI Analog audio cables
- Digital audio cables About video outputs connection Video cables
- Connecting a TV and playback components Connecting using HDMI Connecting your component with no HDMI terminal
- Connecting a satellite receiver Connecting an HDD/DVD or other digital set-top box recorder, VCR and other video sources
- Using the component video jacks Connecting other audio components
- Connecting antennas
- Plugging in the receiver
- Chapter 4: Basic Setup Automatically setting up for surround sound (MCACC)
- Basic Setup04
- Chapter 5: Listening to your system Basic playback
- Auto playback Listening in surround sound
- Using the Advanced surround effects
- Using Front Stage Surround Advance Listening in stereo
- Using Stream Direct Better sound using Phase Control Using the Sound Retriever
- Using surround back channel processing Listening with Acoustic Calibration EQ
- Setting the Audio options Setting the Up Mix function
- Setting What it does Option(s)
- Setting What it does Option(s)
- Choosing the input signal Using the headphone
- Chapter 6: The System Setup menu Using the System Setup menu Manual speaker setup
- Speaker setting
- Crossover network Channel level Speaker distance
- The Input Assign menu The Pre Out Setting
- Chapter Using the tuner Listening to the radio Saving station presets
- Listening to station presets Naming preset stations
- An introduction to RDS Searching for RDS programs
- Displaying RDS information
- Chapter 8: Making recordings Making an audio or a video recording
- Chapter 9: Other connections Wireless music play Remote control operation
- Connecting Optional Bluetooth ADAPTER
- Listening to Music Contents of Bluetooth wireless technology device with Your System
- Chapter 10: Additional information Troubleshooting Problem Remedy
- Problem Remedy
- Problem Remedy
- HDMI Symptom Remedy
- Important information regarding the HDMI connection Resetting the main unit
- Specifications Cleaning the unit
Basic Setup04
If the noise level is too high, NOISY! blinks in
Again, try to be as quiet as possible while this
the display for five seconds. To exit and check
is happening. It may take 1 to 3 minutes.
the noise levels again, press SETUP (see the
7 The Auto MCACC Setup has finished!
notes about ambient noise below) or press
The front panel MCACC indicator lights to
ENTER when you’re prompted to RETRY?.
show the surround settings are complete.
• Do not adjust the volume during the test
The settings made in the Auto MCACC Setup
tones. This may result in incorrect speaker
should give you excellent surround sound from
settings.
your system, but it is also possible to adjust
The system now checks the microphone and
these settings manually using the System
your speaker setup.
1
Setup menu (starting on page 39).
If you see an ERR message in the display, there
may be a problem with your mic or the speaker
Other problems when using the Auto
connections. Turn off the power, and check the
MCACC Setup
problem indicated by the ERR message (see
If the room environment is not optimal for the
below), then try the auto surround setup again.
Auto MCACC Setup (too much background
• ERR Fch – Check front speaker
noise, echo off the walls, obstacles blocking
connections.
the speakers from the microphone) the final
settings may be incorrect. Check for household
• ERR Sch – Check surround speaker
appliances (air conditioner, fridge, fan, etc.),
connections.
that may be affecting the environment and
• ERR SBch – Check surround back or front
switch them off if necessary. If there are any
height speaker connection.
instructions showing in the front panel display,
5 When you see CHECK OK in the display,
please follow them.
confirm your speaker configuration.
• Some older TVs may interfere with the
Use / to check each speaker in turn. YES or
operation of the microphone. If this seems
NO should reflect the actual speakers
to be happening, switch off the TV when
connected. If the speaker configuration
doing the Auto MCACC Setup.
displayed isn’t correct, use / to change
the setting. When you’re finished, go to the
next step.
6 Select CHECK OK in the display then press
ENTER
.
If the display in step 5 is left untouched for 10
seconds, and the ENTER button is not pressed
in Step 6, the Auto MCACC Setup will start
again from the beginning.
The receiver outputs more test tones to
determine the optimum receiver settings for
speaker setting, channel level, speaker
distance, and Acoustic Calibration EQ.
28
En
Note
VSX-520_SYXCN_En.book 28 ページ ２０１０年４月１２日 月曜日 午後７時１３分
1 • Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm will end up
with different size settings. You can correct the setting manually using the Speaker setting on page 40.
• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be
accurate (taking delay and room characteristics into account) and generally does not need to be changed.
