Pioneer VSX-520-K: Crossover network Channel level Speaker distance
Crossover network Channel level Speaker distance: Pioneer VSX-520-K
Table of contents
- IMPORTANT IMPORTANT: THE MOULDED PLUG
- Information for users on collection and disposal of old equipment and used batteries Operating Environment
- Contents
- 08 Making recordings
- Flow of settings on the receiver
- Chapter 1: Before you start Checking what’s in the box Installing the receiver Loading the batteries
- Ventilation
- Chapter 2: Controls and displays Front panel
- Operating range of remote control
- Display
- Controls and displays02
- Remote control
- Controls and displays02
- Controls and displays 02
- Chapter 3: Connecting your equipment Placing the speakers
- Hints on the speaker placement
- Connecting the speakers
- Making cable connections
- HDMI cables About HDMI Analog audio cables
- Digital audio cables About video outputs connection Video cables
- Connecting a TV and playback components Connecting using HDMI Connecting your component with no HDMI terminal
- Connecting a satellite receiver Connecting an HDD/DVD or other digital set-top box recorder, VCR and other video sources
- Using the component video jacks Connecting other audio components
- Connecting antennas
- Plugging in the receiver
- Chapter 4: Basic Setup Automatically setting up for surround sound (MCACC)
- Basic Setup04
- Chapter 5: Listening to your system Basic playback
- Auto playback Listening in surround sound
- Using the Advanced surround effects
- Using Front Stage Surround Advance Listening in stereo
- Using Stream Direct Better sound using Phase Control Using the Sound Retriever
- Using surround back channel processing Listening with Acoustic Calibration EQ
- Setting the Audio options Setting the Up Mix function
- Setting What it does Option(s)
- Setting What it does Option(s)
- Choosing the input signal Using the headphone
- Chapter 6: The System Setup menu Using the System Setup menu Manual speaker setup
- Speaker setting
- Crossover network Channel level Speaker distance
- The Input Assign menu The Pre Out Setting
- Chapter Using the tuner Listening to the radio Saving station presets
- Listening to station presets Naming preset stations
- An introduction to RDS Searching for RDS programs
- Displaying RDS information
- Chapter 8: Making recordings Making an audio or a video recording
- Chapter 9: Other connections Wireless music play Remote control operation
- Connecting Optional Bluetooth ADAPTER
- Listening to Music Contents of Bluetooth wireless technology device with Your System
- Chapter 10: Additional information Troubleshooting Problem Remedy
- Problem Remedy
- Problem Remedy
- HDMI Symptom Remedy
- Important information regarding the HDMI connection Resetting the main unit
- Specifications Cleaning the unit
The System Setup menu 06
41
En
English
Français
Español
Crossover network
When the surround back speakers are
connected:
•Default setting: 100Hz
L
C
R
SR
SBR
SBL
SL
SW
This setting decides the cutoff between bass
sounds playing back from the speakers
When the front height speakers are connected:
selected as LARGE, or the subwoofer, and bass
L
FHL
C
FHR
R
SR
SL
SW
sounds playing back from those selected as
1
Adjust the level of each speaker as the test
SMALL.
It also decides where the cutoff will
3
tone is emitted.
be for bass sounds in the LFE channel.
1 Select ‘X.OVER’ from the SP SETUP menu.
Tip
2Use
/
to choose the frequency cutoff
• You can change the channel levels at any
point.
time by press , then press CH
Frequencies below the cutoff point will be sent
SELECT and LEV +/– on the remote
to the subwoofer (or LARGE speakers).
control. You can also press CH SELECT
and use / to select the channel, and
Channel level
then use / to adjust the channel
Using these settings, you can adjust the overall
levels.
balance of your speaker system.
1 Select ‘CH LEVEL’ from the SP SETUP
Speaker distance
menu.
For good sound depth and separation from
your system, you need to specify the distance
2Use
/
to select a setup option.
of your speakers from the listening position.
• T. TONE M – Move the test tone manually
The receiver can then add the proper delay
from speaker to speaker and adjust
needed for effective surround sound.
individual channel levels.
• T. TONE A – Adjust channel levels as the
1 Select ‘SP DISTN.’ from the SP SETUP
test tone moves from speaker to speaker
menu.
automatically.
2Use
/
to choose the speaker that you
3 Confirm your selected setup option.
want then set the distance.
2
The test tones will start after you press ENTER.
Use / to adjust the distance of each
speaker (in 0.1 m increments).
4 Adjust the level of each channel using
/.
If you selected T. TONE M, use / to switch
speakers.
The T. TONE A setup outputs test tones in the
following order (depends on speaker settings).
Note
1 For more on selecting the speaker sizes, see Speaker setting on page 40.
2 After the volume increases to the reference level, test tones will be output.
3 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level
of each speaker to 75 dB SPL (C-weighting/slow reading).
• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.
RECEIVER
VSX-520_SYXCN_En.book 41 ページ ２０１０年４月１２日 月曜日 午後７時１３分
