Pioneer S-HS100: Rear panel Connection Line level connection
Rear panel Connection Line level connection: Pioneer S-HS100
Table of contents
- IMPORTANT Operating Environment VENTILATION CAUTION
- IMPORTANT: THE MOULDED PLUG
- POWER-CORD CAUTION
- Installation Speaker installation Features Accessory Items
- Installation precautions
- Effective Combination of Subwoofer and Satellite Speakers Connections and Use Panel facilities Front panel Affixing Non-Skid Pads
- Rear panel Connection Line level connection
- Connections and Use Connecting the power cord Connection Connecting the speakers Operation
- Wall-mounting the front and surround speaker system Attaching the brackets Before mounting Operation
- Specifications
- Troubleshooting Symptom Cause Remedy
- Symptom Cause Remedy
01_S-21W&S-11.book 9 ページ ２０１０年３月１６日 火曜日 午前１１時２８分
Rear panel
Auto standby function
English Français Deutsch
When there is no (or only very weak) input
signal for a period of about ten minutes, the
power mode automatically changes to
MIN
MAX
2
standby (power indicator lights red). The
LINE IN
3
ON
AUTO STANDBY
4
power automatically turns on when a signal is
input. The auto standby function is
deactivated when AUTO STANDBY switch is
set to OFF.
ON
5
POWER
6
AC IN
• There may be cases where a connected
component outputs noise or some other
non-audio signal which causes the
subwoofer to automatically power on when
1Power Indicator
in Auto Standby mode. If this happens,
When the power is turned ON, the indicator
switch off the Auto Standby mode and
changes from flashing to steadily lighted
switch the subwoofer on/off manually.
blue. In the standby mode, the indicator
Italiano Español
5 Power switch (POWER)
lights red.
• Switches the subwoofer between ON
and OFF.
6AC IN
• The power is still supplied even when the
• Connect the power cord to a AC socket.
power indicator is off. The power plug
Nederlands
(interrupter) must be unplugged in order to
completely cut the power supply. When not
Connection
using this product for long periods of time,
Before making or changing the
such as when traveling, unplug the power
connections, switch off the power and
cord (interrupter) from the power outlet for
disconnect the power cord from the AC
safety purposes. Failure to do so could lead
outlet.
to fire.
Line level connection
2 Volume knob (MIN/MAX)
• Sets the subwoofer volume.
Supplied RCA plug cord
• With this unit, the bass level can be
independently set, so do not turn up the
Rear Panel
bass on the receiver.
Pyccкий
Connect the set’s LINE IN terminal to the
• The volume knob is factory set at the MIN
receiver’s SUBWOOFER PREOUT terminal
position.
using the included RCA plug cord.
3 Line Level Input terminal (LINE IN)
4 Auto Standby switch (AUTO STANDBY)
• Turning the Auto Standby function on or
• When connected to the PREOUT terminal
off.
for surround center channel on the
receiver, the bass is heard only on the
center channel, so it will be insufficient.
• The default setting for AUTO STANDBY
switch is ON.
9
En
