Pioneer FH-460UI: Radio

Black plate (4,1)

Section

02

Using this unit

Using this unit

! This unit’s AF (alternative frequencies

Frequently used menu

Searching for an RDS station by PTY information

FM SETTING (FM sound quality settings)

search) function can be turned on and off.

operations

1 Press

(list).

AF should be off for normal tuning operation

The sound quality level can be set to match the

2 Turn M.C. to select a program type.

(refer to AF (alternative frequencies search)

broadcast signal conditions of the FM band sig-

NEWS/INFO—POPULAR—CLASSICS—

Returning to the previous display

on page 4).

nal.

OTHERS

Returning to the previous list (the folder one level

1 Press M.C. to display the setting mode.

3 Press M.C. to begin the search.

higher)

Storing and recalling stations

2 Turn M.C. to select the desired setting.

The unit searches for a station broadcasting

1 Press

/DIMMER.

! STANDARD – This is the standard setting.

for each band

that type of program. When a station is found,

! HI-FI – This is the setting to use to prioritize

Returning to the ordinary display

its program service name is displayed.

Using preset tuning buttons

the high quality of stereo sound.

Canceling the main menu

! To cancel the search, press M.C. again.

! STABLE – This is the setting to use to priori-

1 Press BAND/

.

1 To store: Press and hold down one of the

! The program of some stations may differ

tize the low noise of monaural sound.

preset tuning buttons (1/

to 6/ ) until

from that indicated by the transmitted PTY.

Returning to the ordinary display from the list

the number stops flashing.

! If no station is broadcasting the type of

BSM (best stations memory)

1 Press BAND/

.

program you searched for, NOT FOUND is

BSM (best stations memory) automatically stores

2 To recall: Press one of the preset tuning

displayed for about two seconds and then

the six strongest stations in the order of their sig-

buttons (1/

to 6/ ).

the tuner returns to the original station.

Radio

nal strength.

1 Press M.C. to turn BSM on.

Switching the display

Basic operations

To cancel, press M.C. again.

PTY list

Selecting the desired text information

For more details about PTY list, visit the follow-

REGIONAL (regional)

Selecting a band

1 Press DISP to cycle between the following:

ing site:

1 Press BAND/

until the desired band (FM1,

When AF is used, the regional function limits the

! FREQUENCY (program service name or

http://www.pioneer.eu/eur/products/25/121/tech/

FM2,FM3 for FM or MW/LW) is displayed.

selection of stations to those broadcasting region-

frequency)

CarAudio/PTY.html

al programs.

Switching preset stations

! BRDCST INFO (program service name/PTY

1 Press M.C. to turn the regional function on or

1 Press c or d.

information)

Function settings

off.

! Select PCH (preset channel) under SEEK to

! CLOCK (source name and clock)

1 Press M.C. to display the main menu.

use this function.

LOCAL (local seek tuning)

Notes

Manual tuning (step by step)

Local seek tuning allows you to tune in to only

2 Turn M.C. to change the menu option

! If the program service name cannot be ac-

1 Press c or d.

those radio stations with sufficiently strong sig-

and press to select FUNCTION.

quired in FREQUENCY, the broadcast fre-

! Select MAN (manual tuning) under SEEK to

nals for good reception.

quency is displayed instead. If the program

use this function.

1 Press M.C. to select the desired setting.

3 Turn M.C. to select the function.

service name is detected, the program serv-

FM: OFF—LV1—LV2—LV3—LV4

Once selected, the following functions can be

Seeking

ice name will be displayed.

MW/LW: OFF—LV1—LV2

adjusted.

1 Press and hold c or d, and then release.

! Depending on the band, text information can

The highest level setting allows reception of

# If MW/LW band is selected, only BSM, LOCAL

You can cancel seek tuning by briefly pressing

be changed.

only the strongest stations, while lower levels

and SEEK are available.

c or d.

! Text information items that can be changed

allow the reception of weaker stations.

While pressing and holding c or d, you can

depend on the area.

skip stations. Seek tuning starts as soon as

TA (traffic announcement standby)

you release c or d.

Using PTY functions

1 Press M.C. to turn traffic announcement

Notes

You can tune in to a station using PTY (program

standby on or off.

type) information.

! For details about SEEK, refer to SEEK (left/

AF (alternative frequencies search)

right key setting) on page 5.

4

En

<QRD3247-A>4