Pioneer FH-460UI: Initial menu System menu Using an AUX source

Black plate (9,1)

Section

Using this unit

Using this unit

02

2 Press SRC/OFF to select AUX as the

Sound from this system is automatically muted or

SP-P/O MODE (rear output and preout setting)

source.

English

attenuated when a signal from equipment with a

The rear speaker leads output and the RCA output

mute function is received.

Note

of this unit can be used to connect a full-range

1 Press M.C. to display the setting mode.

AUX cannot be selected unless the auxiliary set-

speaker or subwoofer. Select a suitable option for

2 Turn M.C. to select the desired setting.

ting is turned on. For more details, refer to AUX

your connection.

! MUTE – Muting

(auxiliary input) on page 8.

1 Press M.C. to display the setting mode.

! 20dB ATT – Attenuation (20dB ATT has a

2 Turn M.C. to select the desired setting.

stronger effect than 10dB ATT)

Switching the display

! REAR/SUB.W – Select when there is a full-

! 10dB ATT – Attenuation

range speaker connected to the rear speak-

PW SAVE (power saving)

er leads output and there is a subwoofer

Selecting the desired text information

connected to the RCA output.

1 Press DISP to cycle between the following:

Switching this function on enables you to reduce

! SUB.W/SUB.W – Select when there is a

! Source name

the consumption of battery power.

subwoofer connected directly to the rear

! Source name and clock

! Turning on the source is the only operation al-

speaker leads output without any auxiliary

lowed when this function is on.

amp and there is a subwoofer connected

1 Press M.C. to turn the power save on or off.

to the RCA output.

If an unwanted display appears

! REAR/REAR – Select when there is a full-

Turn off the unwanted display using the proce-

range speaker connected to the rear speak-

Initial menu

dures listed below.

er leads output and the RCA output.

If there is a full-range speaker connected to

1 Press and hold SRC/OFF until the unit

1 Press M.C. to display the main menu.

the rear speaker leads output and the RCA

turns off.

output is not used, you may select either

2 Turn M.C. to change the menu option

REAR/SUB.W or REAR/REAR.

2 Press and hold SRC/OFF until the main

and press to select SYSTEM.

menu appears in the display.

3 Turn M.C. to display DEMO OFF and press

3 Turn M.C. to change the menu option

System menu

to select.

and press to select INITIAL.

1 Press and hold SRC/OFF until the unit

4 Turn M.C. to switch to YES.

turns off.

4 Turn M.C. to select the initial menu func-

tion.

5 Press M.C. to select.

2 Press and hold SRC/OFF until the main

Once selected, the following initial menu func-

menu appears in the display.

tions can be adjusted.

3 Turn M.C. to change the menu option

FM STEP (FM tuning step)

and press to select SYSTEM.

1 Press M.C. to select the FM tuning step.

4 Turn M.C. to select the system menu

100 (100 kHz)—50 (50 kHz)

function.

For details, refer to System menu on page 8.

Using an AUX source

1 Insert the stereo mini plug into the AUX

input jack.

En

9

<QRD3247-A>9