Pioneer KRP-SW01BG: Attaching the Pioneer Display and Television Assembling the Stand

Attaching the Pioneer Display and Television

The weight of a Pioneer display and television is

about31.4kg(69.2lbs),theyhavenodepth,and

areunstable.Therefore,atleasttwopeoplemust

assemble and install them.

Attachment Method

1

Attach the fall-prevention straps to the stand

using attachment screws

4

.

Fix the screws with a Phillips screwdriver.

• Besuretoinstallitonaflatstablelocation.

• Insertthescrewsintheholesverticallyandtightenthem

securely.

Assembling the Stand

• Alwaysassembleitonaflattableetc.

• Insertthescrewsintheholesverticallyandtightenthem

securely.

• Whendoingthis,donottakeoffyourhandfromthesupport

column until it is fixed firmly.

Assembly Procedure

1

Secure the support column to the stand

with

the Installation screws

1

(4 locations on the

left and right).

Using a Phillips screwdriver, first loosely attach the

top attachment screw, then loosely attach the bottom

attachment screw.

2

Fully tighten the Installation screws (4 locations

on the left and right).