Pioneer DEH-P8100BT: Removing the Unit Installing the microphone When installing the microphone on the sun visor DIN Rear mount

Installation

English

Removing the Unit

Installing the microphone

1. Insert the supplied extraction keys

Install the microphone in a position and

into both sides of the unit until they

orientation that will enable it to pick up the

click into place.

voice of the person operating the system.

2. Pull the unit out of the dashboard.

CAUTION

• It is extremely dangerous to allow the microphone

lead to become wound around the steering

column or gearstick. Be sure to install the unit in

such a way that it will not obstruct driving.

When installing the microphone

on the sun visor

DIN Rear mount

1. Install the microphone on the

1. Determine the appropriate position

microphone clip.

where the holes on the bracket and

the side of the unit match.

Microphone

Microphone clip

2. Install the microphone clip on the sun

visor.

2. Tighten two screws on each side.

• With the sun visor up, install the microphone

• Use either truss screws (5 mm × 8 mm)

clip. (Lowering the sun visor reduces the voice

or flush surface screws (5 mm × 9 mm),

recognition rate.)

depending on the shape of screw holes in the

bracket.

Microphone clip

Screw

Clamp

Dashboard or

Factory radio mounting bracket

• Use separately sold clamps to secure the lead

Console

where necessary inside the vehicle.

9