JVC KD-DV7402: General settings — PSM

Category Indication Item

Setting, [reference page]

( : Initial)

Amp Gain

• High PWR

: Volume 00 – Volume 50

Amplifier gain

• Low PWR

: Volume 00 – Volume 30 (Select if the maximum power of each

control

speaker is less than 50 W to prevent damaging the speaker.)

ENGLISH

AUDIO

9

Rear Spk *

• On

: Select this to turn on the rear speaker output.

Rear speaker output

• Off

: Cancels.

Color Sel

Initial: All

: Select your favorite display color for each source (or for all

Color selection

Source;

sources), [48, 49].

Color: Pale

Color Set

—

: Create your own colors, and select them for the display color,

Color setting

[49].

10

Day Color

: User color during the day time *

.

10

COLOR

NightColor

: User color during the night time *

.

Red

00 — 11

: Initial: Day Color: 07, NightColor: 05

Green

00 — 11

: Initial: Day Color: 07, NightColor: 05

Blue

00 — 11

: Initial: Day Color: 07, NightColor: 05

Key Illum

• Red

: You can select some of the buttons illumination according to

Illumination switch

• Green

your preference.

9

*

Displayed only when Dual Zone is activated (see page 27).

10

*

Depends on the “Dimmer” setting.

Setting the time for dimmer

3 Adjust the dimmer start time.

1 Turn the control dial to set the dimmer start

• When is shown on the display, you can

time.

move back to the previous screen by pressing number

2 Press ¢ to select “To.” Then, turn the

button 3.

control dial to set the dimmer end time.

1 Follow steps 1 to 3 on page 45.

• In step 2, select “DISP.”

4 Exit from the setting.

• In step 3, select “Dimmer.”

2 Select “Time Set.”

Changing the display color

You can select your favorite display color for each source

(or all sources).

• When is shown on the display, you can

move back to the previous screen by pressing number

button 3 or 6.

48

EN44-51_KD-DV7402_003A_5.indd 48EN44-51_KD-DV7402_003A_5.indd 48 1/22/08 11:13:51 AM1/22/08 11:13:51 AM

Setting the display color

5 Repeat steps 3 and 4 to select the color for

each source (except when selecting “All

1 Follow steps 1 to 3 on page 45.

Source” in step 3).

• In step 2, select “COLOR.”

• In step 3, select “Color Sel.”

6 Exit from the setting.

ENGLISH

2

Creating your own color—User Color

You can create your own colors—“Day Color” or

“NightColor.”

3 Select a source.

1 Follow steps 1 to 3 on page 45.

• In step 2, select “COLOR.”

• In step 3, select “Color Set.”

1

3

All Source *

Ô DISC Ô Changer *

(or

2

Ext In*

) Ô Line In Ô USB Ô FM Ô AM

2 Select “Day Color” or “NightColor.”

3

3

3

Ô DAB *

Ô iPod *

Ô BT Phone *

Ô BT

3

Audio *

Ô AV In Ô (back to the beginning)

1

*

When you select “All Source,” you can use the

same color for all the sources.

2

*

Depends on the “Ext Input” setting, see page 47.

3

*

Displayed only when the target component is

3 Select a primary color.

connected.

4 Select a color.

4 Adjust the level (00 to 11) of the selected

primary color.

Pale Ô Aqua Ô Sky Ô Sea Ô Leaves

Ô Grass Ô Apple Ô Rose Ô Amber Ô

4

Honey

Ô Violet Ô Grape Ô Every *

Ô

5 Repeat steps 3 and 4 to adjust other primary

5

User *

Ô (back to the beginning)

colors.

4

*

The color changes every 2 seconds.

5

6 Exit from the setting.

*

The user-edited colors—“Day Color” and

“NightColor” will be applied (see the right

column for details).

49SETTINGS

EN44-51_KD-DV7402_003A_f.indd 49EN44-51_KD-DV7402_003A_f.indd 49 2/21/08 5:31:20 PM2/21/08 5:31:20 PM