JVC KD-G827: инструкция

CD RECEIVER

РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ

ENGLISHРУCCKИЙ

KD-G827

В соответствии с Законом Российской Федерации “О защите прав потре бителей” срок службы

(годности) данного товара “по истечении которого он может представлять опасность для жизни,

здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7)

лет со дня производства. Этот срок является временем, в течение которого потребитель данного

товара может безопасно им пользоваться при условии соблюдения ин струк ции по эксплуатации

данного товара, проводя необходимое обслуживание, включающее замену расходных материалов

и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляе мые вместе с ним, могут

храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных космети ческих материалов,

упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в

частности, гарантийного свидетельства JVC, которое он может получить в соответствии с законом о

правах потребителя или других законов, связанных с ним.

For canceling the display demonstration, see page 6.

Информацию об отмене демонстрации функций дисплея см. на стр. 6.

For installation and connections, refer to the separate manual.

Указания по установке и выполнению соединений приводятся в отдельной инструкции.

INSTRUCTIONS

ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

GET0363-001A

[EE]

Cover_KD-G827[EE]f.indd 2Cover_KD-G827[EE]f.indd 2 12/23/05 9:54:01 AM12/23/05 9:54:01 AM

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

ENGLISH

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

How to reset your unit

How to use the MODE/SEL button

If you use MODE or SEL (select), the display

and some controls (such as the number buttons,

4/¢ buttons, 5/∞ buttons, and the

control dial) enter the corresponding control

mode.

Ex.: When you press number button 1 after

pressing MODE, to operate the FM tuner.

Your preset adjustments will also be erased.

How to forcibly eject a disc

“Please Eject” appears on the display.

Works as time countdown indicator.

To use these controls for original functions

• If this does not work, reset your unit.

again, wait for 15 seconds without pressing any

• Be careful not to drop the disc when it ejects.

of these buttons until the control is cleared.

• Pressing MODE again also restores original

functions. However, pressing SEL makes the

unit enters a different mode.

Caution:

If the temperature inside the car is below 0°C, the movement of animation and text scroll will be

halted on the display to prevent the display from being blurred.

appears on the display.

When the temperature increases, and the operating temperature is resumed, these functions will

start working again.

2

EN02-05KD-G827[EE]f.indd 2EN02-05KD-G827[EE]f.indd 2 12/23/05 9:52:21 AM12/23/05 9:52:21 AM

How to read this manual

CONTENTS

• Button operations are mainly explained with

the illustrations in the table below.

• Some related tips and notes are explained in

Control panel ................................... 4

“More about this unit” (see pages 35 – 39).

Remote controller —

RM-RK50 ................. 5

ENGLISH

Getting started ................................. 6

Basic operations ................................................... 6

Press briefly.

Radio operations .............................. 7

FM RDS operations ............................ 9

Press repeatedly.

Searching for your favorite FM RDS programme ....... 10

Disc/USB memory operations ............. 12

Playing a disc in the unit ...................................... 12

Press either

Playing discs in the CD changer ............................ 12

one.

Playing a USB memory ......................................... 13

Sound adjustments ........................... 17

Press and hold until your

General settings — PSM ................... 19

desired response begins.

Title assignment ............................... 28

Press and hold both

iPod®/D. player operations ................ 28

buttons at the same time.

Other external component operations ... 30

DAB tuner operations ........................ 31

The following marks are used to indicate...

More about this unit ......................... 35

: Built-in CD player operations.

Maintenance .................................... 39

: External CD changer operations.

Troubleshooting ............................... 40

Specifications ................................... 43

: External USB memory operations.

Warning:

For safety...

If you need to operate the unit while driving,

• Do not raise the volume level too much, as

be sure to look ahead carefully or you may be

this will block outside sounds, making driving

involved in a traffic accident.

dangerous.

• Stop the car before performing any

complicated operations.

Caution on volume setting:

Temperature inside the car...

Discs produce very little noise compared

with other sources. Lower the volume

If you have parked the car for a long time in hot

before playing a disc to avoid damaging

or cold weather, wait until the temperature in

the speakers by the sudden increase of the

the car becomes normal before operating the

output level.

unit.

3

EN02-05KD-G827[EE]f.indd 3EN02-05KD-G827[EE]f.indd 3 12/23/05 9:52:24 AM12/23/05 9:52:24 AM

Control panel

Parts identification

ENGLISH

1 BAND button

7 T/P (traffic programme/programme type)

2 • Control dial

button

•

(standby/on attenuator) button

8 0 (eject) button

3 DISP (display) button

9 USB (Universal Serial Bus) input terminal

4 Remote sensor

p SRC (source) button

• DO NOT expose the remote sensor to

q

(control panel release) button

strong light (direct sunlight or artificial

w SEL (select) button

lighting).

e MODE button

5 Display window

r Number buttons

6 5 (up) / ∞ (down) buttons

t

4/¢ buttons

How to detach/attach the control panel

Detaching... Attaching...

Lever

CAUTION:

The lever comes out if you pressed the 0 button while

the panel is detached. If this happens, push the lever back

into lock position before attaching the panel.

4

EN02-05KD-G827[EE]f.indd 4EN02-05KD-G827[EE]f.indd 4 12/23/05 9:52:25 AM12/23/05 9:52:25 AM